Need help?Do you have a question about the Taktis Incite Fire S3 and is the answer not in the manual?
General| Detector Capacity | 20 Detectors per Zone |
|---|---|
| Standards Compliance | EN54-2, EN54-4 |
| Relative Humidity | Up to 95% RH Non-Condensing |
| Alarm Output | 1A @ 24V DC |
| Fault Relay | 1A @ 24V DC |
| Fire Relay | 1A @ 24V DC |
| Auxiliary Power | 24VDC @ 500mA (Fused) |
Describes physical components: fascia, display, LED indicators, back board, and connectors.
Covers planning, environment selection, and verifying required items before installation.
Details mounting, component removal, cabinet fixing, and cable entry.
Covers battery installation, cabling, power supply setup, and dip switches.
Outlines post-installation checks, power supply tests, and confirming system operation.
Procedures for inspecting and replacing standby batteries and fuses.
To Next Page