Taktomat RTX Series - User Manual

Taktomat RTX Series

35 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Rotary indexer

Type RTX

Original operating instructions

Version 1.0.0 |

14.06.2021

Table of Contents

Other manuals for Taktomat RTX Series

Assembly Instructions27 pages

Questions and Answers

T
Travis MorganAug 11, 2025
What to do if the sensor transmits no signal in Taktomat RTX?
- J
  James SnowAug 11, 2025
  If the sensor on your Taktomat Industrial Equipment isn't transmitting a signal, first ensure that the sensor is properly and fully actuated by removing any blockage. If that's not the issue, inspect the cable for any defects and replace it if necessary. Should the problem persist, the sensor itself might be defective and need replacement. Finally, verify that the sensor is receiving power.
L
larrypetersAug 21, 2025
How to troubleshoot a drive that does not turn in Taktomat RTX?
- S
  Scott HughesAug 21, 2025
  If the drive of your Taktomat Industrial Equipment does not turn, begin by checking the power supply. If the power supply is ok, then inspect the drive contactor for any malfunctions and replace it if necessary. If the drive protection switch has triggered, allow the drive to cool down before latching the switch. Also, make sure that the brake is released by checking the sensor setting on the position cam. Finally, check the sensor cable on the sensor for incorrect connections or wear.
E
Eric SnyderAug 30, 2025
Why does the drive turn with loud humming noises in Taktomat RTX?
- M
  Mary RandallAug 30, 2025
  If the drive of your Taktomat Industrial Equipment turns with loud humming noises, it might be operating on only two phases. Check the fuses and the drive contactor.

Taktomat RTX Series Specifications

General

Brand	Taktomat
Model	RTX Series
Category	Industrial Equipment
Language	English

Related product manuals

Preview: Taktomat RTX350

Taktomat RTX350