BEFORE OPERATING THIS MACHINE ENSURE THAT:
- All guards and fences are securely fitted and correctly set in accordance with
the current regulation.
- Appliance is cleaned out and has been checked over to instructions
- Loose clothing is either removed or fastened and jewellery removed
- That the correct fuel is being used
- The working area is well lit, clean and unobstructed
- Suitable PPE is available
WHEN SETTING, CLEANING AND MAINTAINING THIS MACHINE:
Assure all moving parts of the machine are stationary before setting, cleaning or
making any adjustments.
Report immediately to a person in authority any machine malfunction or operator
hazard. Do not attempt to repair the machine unless competent to do so.
Assure all power sources are isolated before any maintenance work commences.
WHEN IN OPERATION
Parts of the appliance may be above normal temperatures, do not touch any parts
other than instructed.
General Usage of Hand Fed Heater
Initial Lighting
Ensure the machine has power to the control box and appliance is in full working
order (refer to daily checks). Start by lighting a small fire in the centre of the firebox
using paper or cardboard and small lengths of wood. Once the wood has caught fire
start to increase the size of material.
Load Level Inside Fire Box
To Next Page
Loading...
