Talk-a-Phone EC-8 User Manual

Software Programming
Talk-A-Phone Co. Page 7 of 16
D. Code Summary
Command Function
*31* …[up to 8 digits]* Guard Access Code entry for phone programming
(Default Code is *31**)
*30* …[up to 8 digits]* Master Access Code entry to change Guard Access Code or Master
Access Code (Default Code is *30*12345678*)
*30*14725836* Resets Consolidator programming to factory defaults
*32* …[up to 8 digits]* Programs and stores a new Master Access Code
*33* …[up to 8 digits]* Programs and stores a new Guard Access Code
*34* …[up to 2 digits]* Sets number of rings before EC-8 picks up when it is dialed
*62* Remote Mode (default)
*37* Local Mode
*63* Day/Night Mode
*35* In Day/Night Mode, call LOCAL PHONE then TELCO IN
*36* In Day/Night Mode, call TELCO IN then LOCAL PHONE
*39*...[1 or 2]* Program the type of phone line in the TELCO IN
*39*1* for ordinary phone lines (default)
*39*2* for PBX lines
*4...[1-8]* Routes to emergency/information phone in phone jack number 1-8

Talk-a-Phone EC-8 Specifications

General

Brand	Talk-a-Phone
Model	EC-8
Category	Switch
Language	English