Talon Tools AC3100 Series User Manual

WARRANTY INFORMATION
GB
CHAIN SAW WARRANTY
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and sub-
ject to the conditions stated herein, repair or replace without charge this product or any component part,
which upon examination by an Authorised Service Agent or by the Company is found to be defective.
Warranty conditions
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty
Card. The period of the warranty begins from the original date of purchase, notwithstanding any subse-
quent repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Comapany's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Compnay or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to pre-
vent damage.
Warranty exclusions
Normal wear parts or components are subject to seperate terms as follows: Normal wear parts,
components or service required when performaing normal and regular maintenance of this
product are not covered by warranty unless it is found to be defective by an Authorised Service
Agent or by the Company. Normal wear parts include, but are not limited to:
Chains.
Chain Bar.
Spark Plugs.
Carburetor Adjustments.
Lubricants.
Engine Tune-ups.
Filters.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
Model No. AC3100 (Series)
USER MANUAL
Petrol Chain Saws
23.4Þ
CKA
SSAAFFEETTYY OOPPEERRAATTIIOONN MMAAIINNTTEENNAANNCCEE
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety, please
read and follow the safety precautions in this manual before attempting to operate your chain saw.
Improper use can cause serious injury.
This product has been tested at a computed kickback angle (CKA) of no greater than 23.4 degrees.
9096-310008
© Jenn Feng Inc., 1975, 2001
1

Talon Tools AC3100 Series Specifications

General

Brand	Talon Tools
Model	AC3100 Series
Category	Chainsaw
Language	English

Summary

Warranty Information

Warranty Conditions

Details the conditions under which the product warranty is valid, including misuse, unauthorized service, etc.

Warranty Exclusions

Lists components and services not covered by warranty, such as normal wear parts like chains and filters.

Troubleshooting

Troubleshooting the Engine

Provides a table to diagnose and correct common engine starting and running problems.

General Safety Rules

Meaning of Symbols

Explains the meaning of various symbols and colors used on the product for safety.

Kickback Safety Precautions

Offers crucial advice on how to prevent and manage kickback incidents to avoid serious injury.

Important Safety

How to Read Symbols and Colors

Explains the color-coding system used for safety warnings and recommendations in the manual.

Danger: Beware of Kickback

Details the severe risks associated with kickback, including rotational and pinch kickback.

Specifications

General Information

Safety Features

Describes key safety mechanisms like low kickback chain, chain brake, stop switch, and chain catcher.

Assembly Instructions

Assembly Preparation

Lists required tools and outlines essential steps before starting the saw, including chain adjustment and filling tanks.

Installation and Adjustment

Guides on installing the guide bar, chain, clutch cover, and adjusting chain tension and brake.

Fuel and Lubrication

Fuel

Specifies the type of fuel and oil mixture required for the chain saw engine.

Mixing Fuel

Provides instructions and a table for correctly mixing fuel and oil for the engine.

Operating Instructions

Engine Pre-Start Checks

Essential checks to perform before starting the chain saw engine for safe operation.

Starting and Stopping the Engine

Detailed steps for starting, restarting, and stopping the chain saw engine correctly.

Chain Brake Operational Test

Procedure to test the chain brake's functionality before and during use.

Saw Chain and Bar Lubrication

Chain Lubrication and Maintenance

Covers automatic oiling, chain tension, break-in, and sharpening for optimal performance.

General Cutting Instructions

Felling a Tree

Provides instructions on how to safely fell a tree, including planning and execution of cuts.

Limbing and Bucking

Limbing a Tree

Describes the process of removing branches from a fallen tree safely and effectively.

Bucking a Log

Explains how to cut a fallen log into lengths, including proper techniques for supported and unsupported logs.

Bucking Using a Sawhorse

Details the correct and safe positioning for vertical bucking of logs using a sawhorse.

Removing Unit from Storage

Chain and Guide Bar Maintenance

Chain Sharpening and Lubrication

Guidance on sharpening, lubricating, and maintaining the saw chain for optimal performance.

Chain Tension and Break-in

Covers checking chain tension, breaking in new chains, and general upkeep.

Guide Bar Maintenance

Recommends reversing the guide bar and cleaning oil passages for longevity.

Maintenance Procedures

Routine Maintenance

Covers air filter, fuel filter, spark arrester screen, and spark plug cleaning/replacement for engine health.

Carburetor Adjustment and Storage

Guidance on carburetor adjustment and preparing the saw for long-term storage to prevent damage.