EasyManua.ls Logo

Talon Tools AT3351A User Manual

Talon Tools AT3351A
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Petrol Line Trimmer
USER MANUAL
SAFETY
OPERATION
MAINTENANCE
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions
can result in serious personal injury. Spend a few moments to familiarize yourself with your trimmer before each use.
MODEL NO. AT3351A
9096-335143
1
WARRANTY INFORMATION
AU
Worn Bump Head
Trimming line.
Spark Plugs.
Carburetor Tune-ups.
Lubricants.
Engine Tune-ups.
Filters.
LINE TRIMMER WARRANTY
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and subject
to the conditions stated herein, repair or replace without charge this product or any component part, which
upon examination by an Authorised Service Agent or by the Company is found to be defective.
Warranty conditions
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial or commercial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty Card.
The period of the warranty begins from the original date of purchase, notwithstanding any subsequent
repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Company's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Company or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to prevent
damage.
Warranty exclusions
Normal wear parts or components are subject to separate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not covered
by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal
wear parts include, but are not limited to:
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumab
le items and are at the e
xpense of the purchaser
.

Questions and Answers:

Talon Tools AT3351A Specifications

General IconGeneral
BrandTalon Tools
ModelAT3351A
CategoryTrimmer
LanguageEnglish

Summary

WARRANTY INFORMATION

LINE TRIMMER WARRANTY

Details the warranty terms for the line trimmer, including duration and conditions.

Warranty conditions

Outlines the specific conditions under which the warranty is valid and conditions that void it.

Warranty exclusions

Lists components and services not covered by the warranty, such as normal wear parts.

GENERAL SAFETY RULES

Meaning of symbols

Explains the meaning of various symbols used on the product and in the manual for safety.

What to do and not to do

Provides essential safety guidelines and prohibited actions during operation to prevent injury and damage.

GENERAL IDENTIFICATION

Safety Features

Highlights key safety features of the trimmer, such as debris shields and guards.

SPECIFICATIONS

Assembly Instructions

Guides users through the process of assembling the trimmer, including handle and shaft installation.

FUEL AND LUBRICATION

Fuel Mixing Table

Details the correct ratio of gasoline to 2-cycle oil for optimal engine performance and warranty compliance.

OPERATING INSTRUCTIONS

Starting a Cold Engine

Provides step-by-step instructions for starting the trimmer's engine from a cold state.

TRIMMING INSTRUCTIONS

Additional Safety Precautions

Offers crucial safety advice and operational tips to prevent injury during trimming tasks.

Trimming techniques

Explains various trimming methods like mowing, close trimming, fence trimming, and tree trimming.

Linehead Line Release & Procedures

Describes how to release new trimmer line and general trimming procedures for different situations.

Scalping Technique

Details the method for scalping, which involves removing vegetation down to the ground level.

MAINTENANCE INSTRUCTIONS

Replacing Trimming Line

Step-by-step guide on how to replace the trimmer line in the standard head.

Air Filter Maintenance

Instructions on how to clean or replace the air filter to ensure proper engine operation.

FUEL CAP / FUEL FILTER

Fuel Filter Replacement

Instructions for safely removing and replacing the fuel filter to prevent engine damage.

STORING A UNIT

Preparing for Storage

Steps to take to properly prepare the trimmer for long-term storage to prevent issues.

Removing from Storage

Guidance on how to prepare the trimmer for use after it has been stored.

TROUBLE SHOOTING THE ENGINE

Common Engine Problems & Solutions

Lists common engine issues, their probable causes, and corrective actions.

CARBURETOR ADJUSTMENT

Spark Plug Specifications

Provides the correct spark plug gap and torque specifications for maintenance.

DEBRIS SHIELD KNIFE SHARPENING

Knife Sharpening Procedure

Instructions on how to sharpen the cutter knife on the debris shield for optimal performance.

Related product manuals