Talon AC3102-55SC - User Manual

MODEL NO. AC3102-55SC/AC310220S
USER MANUAL
Petrol Chain Saws
43Þ
CKA
SAFETY OPERATION MAINTENANCE
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands during use. For your own safety, please
read and follow the safety precautions in this manual before attempting to operate your chain saw.
Improper use can cause serious injury.
This product has been tested at a computed kickback angle (CKA) of no greater than 43 degrees.
9096-31B203
CHAIN SAW WARRANTY
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and sub-
ject to the conditions stated herein, repair or replace without charge this product or any component part,
which upon examination by an Authorised Service Agent or by the Company is found to be defective.
Warranty conditions
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty
Card. The period of the warranty begins from the original date of purchase, notwithstanding any subse-
quent repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Company's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Company or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to pre-
vent damage.
Warranty exclusions
Normal wear parts or components are subject to seperate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not covered
by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal
wear parts include, but are not limited to:
Chains.
Chain Bar.
Spark Plugs.
Carburetor Adjustments.
Lubricants.
Engine Tune-ups.
Filters.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
WARRANTY INFORMATION
AU
1

Summary

Warranty Information

Chain Saw Warranty

Details the terms and conditions of the chain saw warranty provided by Talon Tools Australia.

Warranty Conditions

Outlines the specific conditions under which the warranty will not apply to the product.

Warranty Exclusions

Lists components and services that are not covered by the warranty, such as normal wear parts.

Troubleshooting

Troubleshooting the Engine

Provides a table of common engine problems, their probable causes, and corrective actions.

General Safety Rules

Meaning of Symbols

Explains the various safety symbols found on the chain saw and their meanings.

Basic Safety Precautions

Presents essential basic safety precautions to follow when using petrol tools.

Kickback Safety Precautions

Advises on how to understand and prevent kickback accidents with a chain saw.

Specifications and Features

Kickback Information

Explains how kickback occurs, including rotational and pinch kickback, and its dangers.

Safety Labels

Refers to safety labels on the chain brake lever and their importance.

General Information

Lists and identifies various parts of the chain saw with a diagram.

Assembly Instructions

Tools for Assembly

Lists the tools required for assembling the chain saw.

Assembly Requirements

Outlines the necessary steps and preparations before operating the new chain saw.

Guide Bar, Chain, and Clutch Cover Installation

Provides step-by-step instructions for installing the guide bar, saw chain, and clutch cover.

Operational Checks and Preparation

Chain Brake Mechanical Test

Explains how to test the functionality of the chain brake.

Fuel and Lubrication

Details the type of gasoline and oil mixture required for the chain saw.

Fuel Management

Fuel Mixing and Recommendations

Provides instructions for mixing fuel and lubricant, and discusses suitable fuel types.

Operating Instructions

Engine Pre-Start Checks

Lists essential checks to perform before starting the chain saw engine.

Starting and Stopping Procedures

Details step-by-step guides for starting, restarting, and stopping the chain saw engine.

Chain Brake Operational Test

Instructs how to perform a periodic operational test of the chain brake.

Saw Chain and Bar Lubrication

Automatic Oiler System

Explains the automatic oiler system and how to adjust oil flow to the bar and chain.

Cutting Techniques

Felling a Tree

Provides instructions and warnings for felling trees safely.

Bucking Logs

Explains the correct posture and technique for bucking logs, including using a sawhorse.

Chain Saw Maintenance

Preventive Maintenance Checklist

Outlines a checklist for regular inspection and maintenance of the chain saw.

Filter and Screen Maintenance

Details procedures for cleaning/replacing air filter, fuel filter, and spark arrester screen.

Chain and Bar Maintenance

Guide Bar and Sprocket Care

Covers guide bar maintenance, sprocket tip lubrication, and oil passage cleaning.

Chain Sharpening and Tension

Details procedures for sharpening the chain and adjusting its tension correctly.

Chain Lubrication

Emphasizes the importance of adequate lubrication for the bar and chain during operation.

Engine and Storage Maintenance

Spark Plug and Carburetor

Covers spark plug cleaning/gapping and carburetor adjustment recommendations.

Storing a Chain Saw

Details the procedures required for storing the chain saw for longer than 30 days.

Talon AC3102-55SC Specifications

General

Brand	Talon
Model	AC3102-55SC
Category	Chainsaw
Language	English