tams elektronik LD-G-42 User Manual

tams elektronik
Manual
Locomotive decoders
LD-G-42 and LD-W-42
LD-G-42
Item numbers
41-04420
41-04421
41-04422
LD-W-42
Item numbers
41-05420
41-05421
tams elektronik
n n n
DCC MM

tams elektronik LD-G-42 Specifications

General

Brand	tams elektronik
Model	LD-G-42
Category	Media Converter
Language	English

Summary

2. Safety Instructions

Hazards and Precautions

Covers mechanical, electrical, fire, thermal, and environmental safety risks with necessary precautions.

3. Safe and Correct Soldering

4.3. Overload Protection

Overload Protection Details

Explains how overload protection works, its adjustable thresholds, and limitations.

4.4. Motor Control

Motor Control Parameters

4.6. Function Outputs

Function Mapping and Effects

5. Technical Specifications

6. Connections

Connection Guidelines and Warnings

Provides critical instructions to avoid decoder damage during connections.

6.1. Connector Pin Assignment LD-G-42

6.2. Connector Pin Assignment LD-W-42

6.6. Connecting LEDs to Function Outputs

LED Connection and Resistor Calculation

6.8. Connecting the Switching Input

7. Programming

Programming Procedures

Covers programming with DCC/Motorola units and using Configuration Variables (CVs).

8. Configuration Variables and Registers

CV Navigation and Basic Settings

8.2. Setting the Motor Control

Motor Control Optimization

8.3. Function Mapping

Assigning Functions to Outputs

8.4. Effects of the Outputs

Output Effects and Flashing Frequency

8.9. Overload Protection Thresholds

8.10. Setting the Address

9. Troubleshooting Checklist

Common Operational Issues

Addresses overheating, connection problems, function errors, and analogue mode issues.