Tanaka TBC-2500 User Manual

E
S
F
R
G
B
G
B
F
R
E
S
Grass Trimmer/Brush Cutter
Coupe-Herbes/Débroussailleuse
Motoguadañas/Desbrozadoras
Owner's manual
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before
they use the power tool. This manual should be stored in safe place.
Mode d'emploi
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d'emploi contient d'importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d'emploi AVANT d'utiliser l'outil motorisé. Garder ce mode d'emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu'ils utilisent l'outil motorisé. Ce mode d'emploi
doit être conservé dans un endroit sûr.
Manual del propietario
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
TBC-225/C/S/CS
TBC-245PF/255PF
TBC-260PF/PFL
TBC-250SF/260SF
TBC-2500
TBC-280PF
000BookTBC-225.indbA000BookTBC-225.indbA 2012/10/2216:19:182012/10/2216:19:18

Tanaka TBC-2500 Specifications

General

Brand	Tanaka
Model	TBC-2500
Category	Trimmer
Language	English

Summary

Warnings and Safety Instructions

Operator Safety

Essential safety guidelines for the user.

Unit and Machine Safety

Ensuring the proper and safe condition of the equipment.

Fuel Safety Precautions

Guidelines for safe handling and storage of fuel.

Cutting Safety Measures

Procedures and warnings related to cutting operations.

Maintenance Safety Guidelines

Safety instructions for performing maintenance tasks.

Transport and Storage Safety

Safe practices for moving and storing the unit.

Specifications

Assembly Procedures

Drive Shaft Assembly

Steps for connecting the drive shaft to the engine.

Cutting Attachment Installation

How to install the cutting head or blade guard.

Handlebar Installation

Guidance on attaching and positioning the handle.

Throttle Wire and Stop Cord Connection

Connecting control wires for operation.

Blade Guard Installation

Proper mounting of the protective blade guard.

Cutting Blade Installation

Instructions for fitting the cutting blade securely.

BRAIN Cutting Head Setup

Specific instructions for installing the BRAIN cutting head.

Operating Procedures

Fuel and Oil Mixture

Correct gasoline and oil ratio for the engine.

Fueling the Unit

Safe procedures for adding fuel to the tank.

Engine Starting Guide

Step-by-step instructions for starting the engine.

Cutting Techniques

Methods for efficient and safe cutting operations.

Engine Stopping Procedure

How to safely shut down the engine.

Carburetor Idle Speed Adjustment

Adjusting the engine's idle speed for optimal performance.

Maintenance

Air Filter Cleaning and Replacement

Maintaining the air filter for engine performance.

Spark Plug Inspection and Gap

Checking and adjusting the spark plug.

Muffler Cleaning

Carbon removal from the muffler for efficient operation.

Engine Cooling Fins

Cleaning fins for proper air cooling.

Flexible Drive Shaft Lubrication

Greasing the flexible drive shaft for longevity.

Angle Transmission Lubrication

Checking and filling grease in the angle transmission.

Blade Inspection and Sharpening

Guidance on blade care and replacement.

Maintenance Schedule

Recommended routine maintenance tasks.

Important Notice