EasyManua.ls Logo

Tanaka TBC-2510 User Manual

Tanaka TBC-2510
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Tanaka
Brush
Cutter
TBC-220/250/2510/265
/300/D
H/SDH/3010
DEBROUSSAILLEUSE
DESBROZADORA
Owner’s
manual
Manuel
d’utilisation
Manual
del
propietario
Question and Answer IconNeed help?

Do you have a question about the Tanaka TBC-2510 and is the answer not in the manual?

Tanaka TBC-2510 Specifications

General IconGeneral
BrandTanaka
ModelTBC-2510
CategoryBrush Cutter
LanguageEnglish

Summary

Tanaka Brush Cutter Manual

Safety Warnings and Precautions

General Safety Warnings

California Proposition 65 warning regarding engine exhaust and general safety.

Operator Safety Guidelines

Essential safety rules for the operator, including PPE and safe handling.

Fuel Handling and Storage Safety

Critical precautions for safe fueling, storage, and handling of gasoline.

Cutting and Maintenance Safety

Safety procedures for cutting operations and during maintenance tasks.

Transport and Storage Safety

Safe practices for safely transporting and storing the brush cutter.

Before Use and Component Identification

Preparing for Operation

Essential steps to take before starting the brush cutter.

Identifying Brush Cutter Components

Diagram and list of the main parts of the brush cutter.

Assembly Procedures

Drive Shaft and Handle Assembly

Step-by-step guide to assemble the drive shaft and handle components.

Controls, Covers, and Cutting Equipment Installation

Instructions for installing throttle controls, covers, and cutting attachments.

Operating Procedures

Fueling and Starting the Engine

Correct procedures for fueling, fuel mixing, and starting the engine.

Cutting and Stopping Operations

Guidelines for performing cutting tasks and safely stopping the engine.

Maintenance and Care

Engine Component Maintenance

Procedures for maintaining the carburetor, spark plug, and cooling system.

Blade, Transmission, and Filter Maintenance

Maintenance steps for the cutting blade, angle transmission, and fuel filter.

Scheduled Maintenance Overview

Daily, weekly, and monthly maintenance checklists for the unit.

Optional Attachments

Installing Optional Attachments

Instructions for installing optional parts like the free disk set or spark arrestor.

Technical Specifications

Related product manuals