Tanaka TBC-255PF User Manual

E
S
F
R
G
B
G
B
F
R
E
S
Grass Trimmer/Brush Cutter
Coupe-Herbes/Débroussailleuse
Motoguadañas/Desbrozadoras
Owner's manual
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before
they use the power tool. This manual should be stored in safe place.
Mode d'emploi
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d'emploi contient d'importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d'emploi AVANT d'utiliser l'outil motorisé. Garder ce mode d'emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu'ils utilisent l'outil motorisé. Ce mode d'emploi
doit être conservé dans un endroit sûr.
Manual del propietario
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
TBC-225/C/S/CS
TBC-245PF/255PF
TBC-260PF/PFL
TBC-250SF/260SF
TBC-2500
TBC-280PF
000BookTBC-225.indbA000BookTBC-225.indbA 2012/10/2216:19:182012/10/2216:19:18

Tanaka TBC-255PF Specifications

General

Brand	Tanaka
Model	TBC-255PF
Category	Lawn Mower
Language	English

Summary

Owner's Manual Introduction

General Safety Warning

Contains critical safety information before operating the power tool.

Symbol Meanings and Safety Notes

Meanings of Symbols

Explains important symbols used in the manual and their meanings.

Additional Safety Warnings

Provides further safety precautions and warnings for operation.

What Is What? (Product Identification)

Warnings and Safety Instructions

Operator Safety

Guidelines for safe operation by the user, including protective gear and conduct.

Unit/Machine Safety

Procedures for ensuring the safe condition and maintenance of the equipment.

Fuel Safety

Precautions for handling and storing fuel safely to prevent ignition or explosion.

Cutting Safety

Specific safety measures related to the cutting attachment and operation.

Maintenance and Transport Safety

Maintenance Safety

Safety precautions to be followed during maintenance procedures.

Transport and Storage Safety

Guidelines for safely transporting and storing the unit.

Specifications

Assembly Procedures

Drive Shaft to Engine Assembly

Step-by-step instructions for connecting the drive shaft to the engine.

Attachment Installation

Guidance on how to assemble and attach cutting implements.

Handle Installation

Instructions for attaching and positioning the handle for operation.

Blade Guard and Cutting Blade Installation

Blade Guard Installation

Steps to properly install the safety blade guard.

Cutting Blade Installation

Procedures for securely installing various cutting blades.

Operating Procedures: Fueling

Fueling the Unit

Instructions on preparing and adding fuel mixture to the engine.

Operating Procedures: Starting and Cutting

Starting the Engine

Step-by-step guide to safely start the engine.

Cutting Operation

Techniques and safety advice for effective grass and brush cutting.

Operating Procedures: Stopping and Maintenance Introduction

Stopping the Engine

Procedures for safely shutting down the engine.

Carburetor and Idle Speed Adjustment

How to adjust the carburetor for optimal engine performance.

Maintenance: Filters, Spark Plug, and Cooling

Air Filter Maintenance

Steps for cleaning and replacing the air filter for proper engine function.

Fuel Filter Maintenance

Guidance on cleaning and maintaining the fuel filter.

Spark Plug Maintenance

Instructions for inspecting, cleaning, and replacing the spark plug.

Muffler and Cylinder Cooling

Cleaning the muffler and ensuring proper engine cooling.

Maintenance: Drive Shaft, Transmission, and Blades

Flexible Drive Shaft Lubrication

How to lubricate the flexible drive shaft for smooth operation.

Angle Transmission Greasing

Checking and refilling grease for the angle transmission.

Blade Maintenance and Replacement

Guidelines for sharpening, replacing, and handling cutting blades safely.

Maintenance Schedule and Important Notices

Daily Maintenance Checks

Daily tasks to ensure the unit's condition.

Weekly Maintenance Checks

Weekly tasks for proper unit upkeep.

Monthly Maintenance Checks

Monthly tasks for thorough unit maintenance.

Blade Conversion Kit Usage

Requirements and warnings for converting to blade use.

Bicycle Style Handle Kit

Information on converting to a dual-handled style.