To Next PageTo Next Page
Need help?Do you have a question about the Tanaka TBC-420PF and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Fuel Tank Capacity | 1.0 L |
| Shaft Type | Straight |
| Cutting Width | 43 cm |
| Handle Type | Bike |
Read manual, check assembly, and carburetor adjustment before operation.
Emphasizes wearing eye, head, and ear protection, and appropriate footwear.
Covers blade thrust, eye protection, bystander safety, and proper equipment use.
Identifies key components of the TBC-420PF and TBC-430PF brushcutters.
Guidelines for safe operation, including protective gear, health, and avoiding hazards.
Safety practices for cutting operations and during maintenance.
Precautions for moving and storing the unit, including fuel safety.
Steps for connecting the drive shaft to the engine and mounting the handle.
Connecting throttle/stop cords and attaching the blade guard.
Instructions for attaching the guard extension to the blade guard for trimmer heads.
Steps for securely mounting cutting blades, noting thread direction and cotter pins.
Guidance on installing the cutting head and warnings regarding cutting lines.
Specifies the type of gasoline and two-cycle oil, and the correct mixing ratio.
Safety guidelines for refueling, including engine shutdown and moving away before starting.
Step-by-step guide for starting the engine, including choke and throttle settings.
Guidelines for effective cutting, engine speed, blade thrust, and bystander safety.
Procedure for safely shutting down the engine, ensuring the attachment has stopped.
Instructions for adjusting idle speed and warnings related to adjustment.
How to clean the air filter to prevent malfunctions and maintain performance.
Procedures for maintaining the fuel filter and spark plug.
How to clean the muffler and cylinder cooling fins for optimal performance.
How to check and refill grease in the angle transmission.
Safety and procedures for blade maintenance, sharpening, and replacement.
Outlines daily, weekly, and monthly maintenance tasks for the unit.
Installation instructions for optional accessories like the free disk set and spark arrestor.
Provides key technical data including engine size, weight, and noise levels.
Manufacturer's declaration regarding product safety and directive compliance.
