ACCESSORY
INFO
www.tanakapowerequipment.com
• FEATURES
• BENEFITS
• SPECIFICATIONS
ISM, Inc. • 1028 4th Street SW, #B • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212 • E-mail: support@tanaka-ism.com
CARBIDE TIP
DRILL BITS
BULB / PLANT
AUGER BITS
All data and specifications are subject to change without notice.
• Carbide Tipped
Will outlast and outperform
normal wood-boring bits.
•
High Quality Carbide Compound
For superior strength and durability.
•
Rapid Chip Evacuation
Special fluting provides a large chip
storage area and prevents clogging.
•
Long Lasting and Dependable
Can be resharpened or completely
rebuilt if necessary.
* Ideal for use in
Tanaka Drills
Drill Bit Description Diameter Length Part #
9/16" 12" 745102
11/16" 16" 745103
13/16" 22" 745104
9/16" 12" 745105
11/16" 16" 745106
13/16" 22" 745107
9/16" 12" 745108
3/4" 12" 745109
5/8" 18" 745110
1/4" 12" 745111
3/8" 12" 745112
1/2" 12" 745113
Masonry: For concrete,
brick, stucco, and other
stone materials.
Wood: For treated wood
containing nails, staples,
or other metal materials.
Railroad: For general
purpose wood boring for
landscaping.
Pole: For treated wood
used on poles, fencing,
and beams.
• Can be Used for Many Purposes.
• Drill Holes in all Types of Soil.
•
Speeds up Planting by 500 Percent
•
Leave Dirt in a Loose,
Easy to Pack Condition.
Item No. Diameter Length
745201 3" 7"
745202 3" 12"
745203 3" 24"
* Ideal for use in
Tanaka Drills
To Next Page
Loading...
