tanda.com
3
Light sensitivity test
Follow these instructions to see if you are sensitive to light:
1. Press the orange power button.
2. The device will vibrate and the bacteria-killing blue light
will illuminate.
3. Lightly place and hold the Zap on your inner arm for the
2 minute treatment cycle.
4. Press the orange power button again to do another 2
minute treatment on the same area of your inner arm.
5. Wait 24 hours. You should NOT
experience any adverse reaction
during the next 24 hours.
6. An adverse reaction is pain or
discomfort in the treatment areas
or any prolonged skin redness.
22680a3SyneTandaZapManual.indd 3 6/11/12 11:48 AM
To Next Page
Loading...