To Next PageTo Next Page
Need help?Do you have a question about the TANDBERG PrecisionHD 720p and is the answer not in the manual?
General| Resolution | 1280 x 720 |
|---|---|
| Frame Rate | 30 fps |
| Video Compression | H.264 |
| Audio Support | Yes |
| Connectivity | Ethernet |
| Video Standard | HD |
| Lens Type | Fixed |
| Field of View | 70 degrees |
| Power Supply | PoE |
| Operating Temperature | 0 to 40 degrees Celsius |
Describes the camera matters specific to the PrecisionHD 1080p/720p cameras.
Lists the TANDBERG PrecisionHD cameras covered in this manual.
References other useful TANDBERG documentation for related products.
Details the physical components and connectors of the 1080p 12X/4X camera model.
Details the physical components and connectors of the 720p camera model.
Describes the available camera cables including HDMI, HD-SDI, and adapter options.
Provides pin-out diagrams for assembling custom VISCA camera control and daisy chain cables.
Explains how to connect the PrecisionHD camera to TANDBERG Codec C20 and Quick Set C20.
Explains how to connect the PrecisionHD camera to TANDBERG Codec C40.
Explains how to connect the PrecisionHD camera to TANDBERG Codec C60.
Explains how to connect the PrecisionHD camera to TANDBERG Codec C90.
Details video output formats for the 1080p 12X/4X camera.
Configuration of video output formats using DIP switches on the camera.
Illustrates connecting multiple 1080p 12X/4X cameras in a chain.
Illustrates connecting multiple 720p cameras in a chain.
Information specific to the TANDBERG PrecisionHD 1080p 12X/4X camera model.
Guide to controlling cameras using the VISCATM protocol.
Details the VISCATM/RS-232 message format and command exchange.
Lists network and interface commands for camera control.
Comprehensive list of camera control commands and their parameters.
Commands for controlling Pan, Tilt, Zoom, and Focus functions of the camera.
Lists inquiry commands to retrieve camera status and information.
Commands for uploading new software to the camera.
Commands for debugging TANDBERG PrecisionHD cameras.
Miscellaneous commands for camera control and reset.
Explains how DIP switches and software commands select video modes.
Provides detailed technical specifications for all camera models.
