Need help?Do you have a question about the TANDBERG TT1260 and is the answer not in the manual?
Defines the manual's purpose and intended audience.
Provides an overview of the TT1260's capabilities and components.
Details the TT1260's function as a satellite receiver and its system context.
Explains the TT1260's role as a decoder and its system integration.
Describes the different operating modes for controlling the TT1260 unit.
Provides a visual overview of the TT1260's physical construction and controls.
Lists manual versions and acknowledges trademarks used within the document.
Highlights critical safety information, cautions, and notes for safe operation.
States the equipment's compliance with Electromagnetic Compatibility standards.
Details available customer support services, service levels, and contact details.
Provides addresses and contact information for finding TANDBERG Television worldwide.
Offers information on training courses provided by TANDBERG Television for product operation and maintenance.
Outlines essential safety guidelines and handling procedures for equipment installation.
Details initial inspections and safe moving procedures before installation.
Covers physical mounting, ventilation, and cable installation requirements for the TT1260.
Explains power supply requirements, voltage, fusing, and connection safety.
Details general signal connection points and interfaces on the rear panel.
Explains how and where option cards are connected to the TT1260.
Covers the sequence for switching on the TT1260 and its initial operating states.
Describes the function of front panel buttons and the LCD display for operation.
Explains the Navigate and Edit modes for interacting with the TT1260 via the front panel.
Guides users on navigating LCD menus and entering values for local operation.
Details the steps for configuring satellite receiver and decoder inputs via menus.
Explains how to select and configure services, video, audio, and data components.
Describes how to set up and manage alarm conditions and relay outputs in the TT1260.
Covers the configuration of system-wide parameters like operating mode, IP address, and LCD contrast.
Introduces the front panel LEDs used for indicating unit status and abnormal performance.
Identifies the physical location and function of the ALARM and LOCK LEDs on the front panel.
Details the role of the ALARM LED in signalling fault conditions and summary alarms.
Explains the function and characteristics of the alarm relay outputs on the Alarm Relay Card.
Shows the physical positions for installing various optional expansion cards.
Describes the ASI Input Card, its general function, and connector specifications.
Details the QPSK Input Card, its support for L-band inputs, and connector specifications.
Explains the 8PSK/16QAM Card, its demodulation capabilities, and connector specifications.
Covers the RS-422 Data Enabler Card for high-speed data output and its connector details.
Lists various software options such as QPSK/8PSK/16QAM, Signal Protection, RAS, and BISS.
Details the software option for VideoGuard Director CA and TANDBERG Director NCP.
Describes the software option enabling BISS-1 and BISS-E conditional access.
Outlines basic checks like cooling fan operation and exterior cleaning procedures.
Provides conditions that may require servicing and information on replacement parts.
Details the equipment warranty coverage and available maintenance support services.
Offers guidance on troubleshooting common issues and preliminary investigations.
Explains how to safely replace the equipment's AC power fuse.
Defines abbreviations, acronyms, and technical terms used throughout the manual.
Details video and audio output standards, resolutions, and performance characteristics.
Explains audio decoding capabilities, formats, and output stage specifications.
Provides technical details on the TT1260's internal decoder and its video processing capabilities.
Details input parameters for QPSK, 8PSK/16QAM satellite receivers, and ASI inputs.
Covers specifications for video, audio, data, remote control, and alarm output connectors.
Specifies the operational and storage environmental requirements for the equipment.
Details the power supply unit's voltage, frequency, consumption, and connector requirements.
Lists safety standards, EMC compliance, CE marking, and C-Tick mark information.
Explains how to use and navigate the front panel LCD menus and their tree structure.
Outlines the main menu items and how they provide access to lower-level menus.
Visually represents the hierarchical structure of the TT1260's menus for system configuration.
Details how to manage and store preset service configurations for quick access.
Guides users through the Input Status menu for configuring ASI, QPSK, and 8PSK/16QAM inputs.
Explains menus for configuring video, audio, data, teletext, VBI, PCR PID, and network ID settings.
Covers menus for managing RAS, Signal Protection, Director, BISS, Broadcaster ID, and Transport Stream Output.
Details menus for setting up and managing satellite BER, transport stream, video, and audio alarms.
Explains menus for setting operating mode, LCD contrast, serial protocol, IP address, and system restart.
Guides on setting up the TT1260 for use with the TANDBERG Director system and its over-air mode.
Describes how the TT1260 reacts to various remote commands from the Director system.
Lists supported languages and their corresponding abbreviations for audio and system settings.
Explains how to restore the TT1260 to its original factory default parameter settings.
Provides step-by-step instructions for setting up satellite receiver and decoder inputs.
Offers a quick guide for setting up services, service hunt mode, and preset services.
To Next Page
General
