Need help?Do you have a question about the TANDBERG TT1220 and is the answer not in the manual?
General| Model | TT1220 |
|---|---|
| Type | Receiver |
| Power Supply | 100-240VAC, 50/60Hz |
| Frequency Response | 20Hz - 20kHz |
| Frequency Range | 20Hz - 20kHz |
| Output Connector | Various audio and video connectors |
Provides an overview of the TT1220's capabilities and specifications.
Explains the different operational modes for controlling the TT1220 unit.
Details the physical installation process, including fixing and ventilation.
Describes all input and output connectors for signal interfacing.
Explains how to navigate and use the front panel LCD menus and keypad.
Details the configuration steps for different input types like QPSK, COFDM, and ASI.
Guides on selecting services, languages, and components for decoding.
Introduces methods for controlling the TT1220 remotely via RS-232 or Over-Air.
Covers how to configure alarm messages and their severity levels.
Provides guidance on diagnosing and resolving system failures or abnormal conditions.
Details the technical specifications for various transport stream inputs.
Details the setup menu items for configuring the unit's parameters.
Explains how to view the unit's operational status and diagnostics.
Guides on setting up the TT1220 to work with the TANDBERG Director system.
Explains how the TT1220 reacts to commands sent from the TANDBERG Director System.
To Next Page
