T&M Performance SA4200 - Page 8

V12/2009
Technische Daten Technical Specications
SA 4200 SA 8200
Output Power (RMS) @ 8 Ohm 4x 140 Watt 8x 140 Watt
Output Power (RMS) @ 4 Ohm 4x 200 Watt 8x 200 Watt
Output Power (RMS) @ 100 V (with optional
transformer)
4x 160 Watt 8x 160 Watt
Frequency Response (+/- 1 dB) 20 Hz - 20 kHz
THD (20 Hz - 20 kHz) < 0.1 %
Crosstalk (20 Hz - 20 kHz) 60 dB
Slew Rate (V/µs) 15
Damping Factor (20 Hz - 1 kHz) > 100
Input Impedance (balanced) 20 kOhm
Input Sensitivity (rated power @ 8 Ohm) 0.775 V
S/N Ratio 100 dB
Current Draw @ 1/8 Power @ 4 Ohm
(1)
3.22 A 7.86 A
Current Draw @ 1/3 Power @ 4 Ohm
(2)
4.61 A 10.05 A
Current Draw @ 1/8 Power @ 100 V
(1)
2.52 A 4.74 A
Current Draw @ 1/3 Power @ 100 V
(2)
3.82 A 7.52 A
Heat Dissipation @ 1/8 Power @ 4 Ohm
(1)
544 Watt / 1857 BTU/hr 1293 Watt / 4409 BTU/hr
Heat Dissipation @ 1/3 Power @ 4 Ohm
(2)
878 Watt / 2695 BTU/hr 1524 Watt / 5197 BTU/hr
Heat Dissipation @ 1/8 Power @ 100 V
(1)
342 Watt / 1328 BTU/hr 743 Watt / 2536 BTU/hr
Heat Dissipation @ 1/3 Power @ 100 V
(2)
589 Watt / 2008 BTU/hr 1175 Watt / 4007 BTU/hr
Protection Overload, DC, Overheat, Limiter (audio peak),
Soft Start, HF, back-EMF
Cooling two individually temperature controlled fans
Input Connectors XLR, female
Output Connectors block connector, screwable
Power Supply 230 Vac +/- 10% 50/60 Hz
Construction Black Steel Chassis, Aluminium Front Panel
Weight 19 kg 25 kg
Dimensions (w x d x h, mm) 483 x 482 x 132
(1) 1/8 Power = IEC Standard, normal music
(2) 1/3 Power = compressed music at clip level