Press
CD
CENTER] if you are sure
you
want
to
format the
diskette (and erase all its informa-
tion). Press
CD
CENTER]
or .
-BREAK
]
if you've
changed your mind.
For help in understanding TRSDOS command
messages,
see
your Disk
System
Owner's
Manual.
TRSDOS Messages
TRSDOS gives you an
error
message if there
is an operator error or
a
hardware or software
problem.
Usually, TRSDOS displays
a
com-
plete error
message, but sometimes it displays
only
a decimal
or
hexadecimal error number.
For help in understanding
TRSDOS errors,
see
your Quick Reference
Guide.
An operator error tells
you that
you
are ask-
ing the computer
to do something it can't
do.
Perhaps the most
common operator error is
typing
a
command
or program name incor-
rectly. For example,
suppose you type this for
the CAT command:
CATS
CENTER]
TRSDOS
gives you this error message:
Program
not found
You simply need to
type
the
command again,
spelling
it
correctly:
cat
CHUB
Another
common operator error
is
trying
to
store
too much information
on a diskette. For
example,
suppose
you
are in the
middle of
storing information and run
out
of
disk
space.
TRSDOS warns
you
with this
message:
Disk
space
full
Either
(1)
use
another
diskette or
(2)
use
the
REMOVE
command to delete files, freeing
disk
space.
25
To Next Page
Loading...