Specifications
Autograph Mini
PERFORMANCE
Recommended amplifier power 20 - 100 Watts
Continuous power handling 50 Watts RMS
Frequency response 68Hz - 54kHz -6dB
Sensitivity 88dB (2.83 Volts @ 1 metre)
Nominal impedance 8 Ohms
DRIVE UNITS
Dual Concentric™ high frequency 19mm (0.75”) titanium dome with Tulip WaveGuide™
Dual Concentric™ low frequency 100mm (4.00”) treated paper pulp cone with rubber
surround. 33mm (1.33”) edge wound voice coil
Dispersion 90 degrees conical
CROSSOVER
Frequency 2.3kHz
Type Passive low loss 2nd order compensated LF, 1st order
compensated HF
CONSTRUCTION
Enclosure type Rear ported
Volume 3.5L (213.5 cu.ins”)
Dimensions 345 x 210 x 130mm
(13.50 x 8.25 x 5.00”)
Weight 4.0kg (8.8 lbs)
Finish Teak veneer with solid teak trim detail
Page 3
To Next Page
Loading...
