Tannoy Definition - Technical Specifications

010_ DEFINITION MANUAL
TECHNICAL SPECIFICATIONS
DC6 LCR
PERFORMANCE
Recommended amplier power 20 - 175
(watt RMS)
Continuous power handling 87
(watt RMS)
Peak power handling (watt) 350
Sensitivity (2.83 volt @ 1 m) 89 dB
Nominal Impedance (ohm) 8
Frequency response (-6 dB) 35 Hz - 35 kHz
Dispersion (degrees conical) 90
DRIVE UNITS
Dual Concentric high frequency 25 mm (1”) Titanium dome
with Tulip WaveGuide
Dual Concentric low frequency 150 mm (6”) treated paper
pulp cone with rubber
surround.
44 mm (1.75”) edge
wound voice coil
Bass Driver 150 mm (6”) treated paper
pulp cone with rubber
surround
44mm (1.75”) edge
wound voice coil
Passive Radiator 150 mm (6”) treated paper
pulp cone with rubber
surround
Magnetic Screening Yes
CROSSOVER
Crossover frequency 1.7 kHz
Crossover Type
Passive low loss
2nd order LF, 1st order HF
Deep Crypgenically Treated
CONSTRUCTION
Enclosure type Passive Radiator ported
Volume 19 L (0.67 cu. ft.)
Dimensions (H x W x D) 226 x 600 x 285 mm
excl grille (8.90 x 23.62 x 8.46”)
Weight 11.9 kg (26.2 lbs)
Finish High gloss black
High gloss cherry
High gloss dark walnut