9
10. Technical Specifications
System Type Multi-Purpose Loudspeaker
Frequency Response +/- 3dB
(1) 100Hz - 20kHz
Maximum SPL
(2) 105dB (average) 108dB (half-space)
DI Averaged @1kHz (ISO) 3.9
@2kHz (ISO) 7.9
@4kHz (ISO) 8.6
@8kHz (ISO) 10.3
@16kHz (ISO) 9.2
Q Averaged @1kHz (ISO) 2.5
@2kHz (ISO) 6.1
@4kHz (ISO) 7.2
@8kHz (ISO) 10.7
@16kHz (ISO) 8.3
Input Sensitivity
(for Maximum Input) 375mV (balanced)
750mV (unbalanced)
Input Impedance 10 kWatt
Power Output 30 Watt
Protection Circuitry Thermal
Supply Mains voltage adjustable to 220-240V or
100-120V AC.
Fuse: 250mV/250V for 220-240V
500mV/125V for 100-120V
Power Consumption 45VA
Driver Complement 1 x 127mm (5”) ICT™ Point Source
Enclosure 4.6 litre polypropylene
Finish Black or White
Connectors Balanced, Phoenix™ style 3 terminal in / unbalanced RCA in
Fittings 2 x yoke fixing points
1 x female gimble plate
Dimensions 223.5(H)´ 162.6(W)´ 153.0(D)mm
8.81"(H)´ 6.41"(W)´ 6.03"(D)
Weight 2.9kg (6lbs 5oz)
Accessories MB5Y and MB5B mounting brackets
Shipping Dimensions 302 x 168 x 168mm
(12
7
/8 x6
3
/8 x6
3
/8“)
Shipping Weight 3.1kg (6lbs 15oz)
NOTES: (1) Average over stated bandwidth. Measure d at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m
Tannoy operates a policy of continuous research and development. The introduction of new m aterials or manufacturing methods will
always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice. Please verify the
latest specifications when dealing with critical applications.
To Next Page
Loading...
