The iQ 10 & iQ 10P is supplied as a ‘skeletal’ design loudspeaker, which can be used
both indoors and out due to it’s weatherproof exterior. As it is compact and
lightweight, it can easily be flown into tight corners and small spaces. The iQ 10C &
iQ 10PC are built into plywood cabinets that match the profile of the iQ 18B sub bass
cabinet. If the iQ 10 is flown outdoors, please note the unit should be positioned such
that the Speakon™ connectors are facing downwards, to avoid excess moisture
leaking into the socket.
The following optional flying kit is available:
Skeletal Flying
The iQ 10 ‘skeletal’ enclosure include a yoke as standard. The unit can be flown from
a flying bar or relevant rigging via the flying loop, by utilising a Tannoy SECUR-ET
VPC hook clamp or equivalent.
10
To Next Page
Loading...
Need help?
General
