Tannoy MERCURY V User Manual




Tannoy MERCURY V Specifications

General

Brand	Tannoy
Model	MERCURY V
Category	Speakers
Language	English

Summary

Warranty Information

Amplifier and Cable Selection

V1, VC & VR Models and General Installation

V1, VC & VR Models Positioning

General Installation Safety

Ensure the amplifier is OFF before connecting or disconnecting cables and check polarity.

Connecting V1, VC & VR

Connect the V1, VC, and VR models to your amplifier, ensuring correct polarity for optimal audio.

Connecting the V4 Loudspeakers

Single Wire Mode

Connect the V4 speakers using single-wire mode with link bars in place.

Bi-Wire Mode

Connect the V4 speakers using bi-wire mode by removing link bars.

Bi-Amp Mode

Connect the V4 speakers using bi-amp mode with separate amplifiers for bass and treble.

Optimizing Speaker Placement and Care

Positioning and Fine-Tuning

Guidance on positioning speakers for optimal stereo imaging and bass response.

Technical Specifications

Set-Up Diagrams

Fig. 1 Connection V1, VC and VR

Fig. 2 Connection V4, Single Wire Mode

Fig. 3 Connection V4 Bi-Wire Mode

Fig. 4 Connection V4 Bi-Amp Mode

Fig. 5 Recommended Positioning - Stereo Pair

Fig. 6 Recommended Positioning - Home Cinema