Tannoy Revolution XT - Technical Specifications (XT 6;6 F;8 F); Performance Specifications; Drive Unit Specifications; Crossover Specifications

08_ REVOLUTION XT MANUAL
TECHNICAL SPECIFICATIONS
REVOLUTION XT 6 REVOLUTION XT 6F REVOLUTION XT 8F
PERFORMANCE
Recommended amplier power
(watt RMS)
25 - 120 25 - 150 25 - 200
Continuous power handling
(watt RMS)
60 75 100
Peak power handling (watt) 240 300 400
Sensitivity (2.83 volt @ 1 m) 89 dB 90 dB 91 dB
Nominal impedance (ohm) 8 8 8
Frequency response (-6 dB) 46 Hz - 32 kHz 38 Hz - 32 kHz 34 Hz - 32 kHz
DRIVE UNITS
Dual Concentric high frequency 25 mm (1”) Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
25 mm (1”) Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
25 mm (1”) Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
Dual Concentric low frequency 150 mm (6”) multi-bre paper
44 mm (1.75”) voice coil
150 mm (6”) multi-bre paper
44 mm (1.75”) voice coil
200 mm (8”) multi-bre paper
44 mm (1.75”) voice coil
Bass driver - 150 mm (6”) multi-bre paper
pulp cone with rubber surround.
44 mm (1.75”) edge wound
voice coil
200 mm (8”) multi-bre paper
pulp cone with rubber surround.
44 mm (1.75”) edge wound
voice coil
CROSSOVER
Crossover frequency 1.8 kHz 250 Hz & 1.8 kHz 250 Hz & 1.8 kHz
Crossover type Passive low loss 2
nd
order
low pass, 1
st
order high pass
Passive low loss 2
nd
order
low pass, 1
st
order high pass
Passive low loss 2
nd
order
low pass, 1
st
order high pass
CONSTRUCTION
Enclosure type Downward ported reex Downward ported twin
cavity coupled reex
Downward ported twin
cavity coupled reex
Volume 10.8 l (0.38 cu. ft.) 30.7 l (1.08 cu. ft.) 48.8 l (1.72 cu. ft.)
Dimensions (H x W x D)
(incl. plinth)
400.5 x 221 x 302 mm
(15.8 x 8.7 x 11.9”)
1005 x 269 x 317 mm
(39.6 x 10.6 x 12.5”)
1080 x 317 x 345 mm
(42.5 x 12.5 x 13.6”)
Net weight 7.5 kg (16.4 lbs) 16.3 kg (35.9 lbs) 19.9 kg (43.9 lbs)
Finish Dark Walnut
Medium Oak
Dark Walnut
Medium Oak
Dark Walnut
Medium Oak