REVOLUTION MANUAL _011
TECHNICAL SPECIFICATIONS
Revolution DC6 Revolution DC6 T
PERFORMANCE
Recommended amplifier power 20 – 150 20 – 175
(Watts RMS)
Continuous power handling 75 87
(Watts Peak RMS)
Peak power handling (Watts) 300 350
Sensitivity (2.83 Volts @ 1m) 88dB 89dB
Nominal Impedance (Ohms) 8 8
Frequency response (-6dB) 46Hz – 35kHz 34Hz – 35kHz
Dispersion (degrees conical) 90 90
DRIVE UNITS
Dual Concentric™ high frequency 25mm (1”) Titanium dome 25mm (1”) Titanium dome
with Tulip WaveGuide
TM
with Tulip WaveGuide
TM
Dual Concentric™ low frequency 150mm (6”) treated paper 150mm (6”) treated paper
pulp cone with pulp cone with
rubber surround. rubber surround.
44mm (1.75”) edge 44mm (1.75”) edge
wound voice coil wound voice coil
Bass Driver - 150mm (6”) treated paper
- pulp cone with
- rubber surround.
- 44mm (1.75”)
- wound voice coil
CROSSOVER
Crossover frequency 1.8kHz 1.7kHz
Crossover Type Passive low loss Passive low loss
2nd order LF, 1st order HF 2nd order LF, 1st order HF
CONSTRUCTION
Enclosure type Rear ported Rear ported
Volume 10.8L (0.381 cu. ft.) 29.6L (1.045 cu. ft.)
Dimensions (excl grille) H x W x D 365 x 202 x 253mm 950 x 202 x 253mm
(14.37 x 7.95 x 9.98”) (37.40 x 7.95 x 9.98”)
Dimensions (inc plinth) H x W x D
- 950 x 256 x 292mm
(37.40 x 10.09 x 11.50”)
Weight 6.8kg (15.0lbs) 15.1kg (33.3lbs)
Finish Espresso Espresso
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
To Next Page
Loading...
Need help?
General