Specifications
Sensys DC1
PERFORMANCE
Recommended amplifier power 20 - 150 Watts RMS
Continuous power handling 110 Watts RMS
Peak output power 325 Watts
Low frequency response 35Hz (-6dB)
Sensitivity 88dB (2.83 Volts @ 1 meter)
Nominal impedance 8 ohm
Frequency response 39Hz - 51kHz (-6dB)
DRIVE UNITS
Wideband™ High frequency 25mm (1.00”) 25-micron titanium dome, neodymium
magnet system
Dual Concentric™ high frequency 25mm (1.00”) 25-micron titanium dome, neodymium
magnet system
Dual Concentric™ low frequency 165mm (6.50”)
CROSSOVER
Frequency 1.8kHz, 16kHz
Type 4th order LF, 1st order band pass HF
CONSTRUCTION
Enclosure type Reflex
Shielding Yes
Volume 13 litres
Dimensions 406 x 210 x 292 mm (16.00 x 8.25 x 11.50")
Additional features 15mm particle board, internally cross-braced enclosure
Weight 8.5kg (18.7lbs)
Finish Maple, rosewood & black ash
Page 3
To Next Page
Loading...
Need help?
General
