Need help?Do you have a question about the Tannoy System 800 and is the answer not in the manual?
General| Type | Studio Monitor |
|---|---|
| Frequency Response | 45 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Driver Configuration | Dual Concentric |
| Tweeter Size | 1 inch |
| Woofer Size | 8" |
| Drivers | 8" Dual Concentric Driver |
Instructions for safely removing speakers from packaging and inspecting for damage.
Warning about high sound levels and potential hearing loss, recommending sound level meter use.
Guidance on selecting and using appropriate power amplifiers for the speakers.
Detailed explanation of the Dual Concentric drive unit's design and features.
Explanation of the cabinet's design, construction, and acoustic properties.
Discussion on the crossover design and integration of system components for optimal performance.
Instructions for cleaning and maintaining the speaker cabinet's exterior finish.
Step-by-step guide for safely removing the Dual Concentric driver from the cabinet.
Procedures for servicing or replacing the HF unit or diaphragm assembly.
Instructions for inspecting and removing the crossover assembly.
Guidance on testing the speaker's performance using a sine wave generator.
Graph showing the speaker's on-axis anechoic frequency response.
Graph illustrating the speaker's impedance characteristics over frequency.
To Next Page
