Specifications
Sensys DC2
PERFORMANCE
Recommended amplifier power 20 - 175 Watts RMS
Continuous power handling 125 Watts RMS
Peak output power 375 Watts
Low frequency response 34Hz (-6dB)
Sensitivity 89dB (2.83 Volts @ 1 meter)
Nominal impedance 8ohm
Frequency response 34Hz - 51kHz
DRIVE UNITS
Wideband™ High frequency 25mm (1.00”) 25-micron titanium dome, neodymium
magnet system
Low frequency 1 x 175mm (6.50”)
Dual Concentric™ high frequency 25mm (1.00”) 25-micron titanium dome, neodymium
magnet system
Dual Concentric™ low frequency 1 x 165mm (6.50”)
CROSSOVER
Frequency 250Hz, 1.8kHz, 16kHz
Type 4th order LF, 1st order band pass HF, 2nd order LLF
CONSTRUCTION
Enclosure type Reflex
Shielding Yes
Volume 36 litres
Dimensions 966 x 210 x 293mm (38.15 x 8.25 x 11.75")
Additional features 15mm particle board, internally cross-braced enclosure
Weight 17kg (37.5lbs)
Finish Maple, rosewood & black ash
Page 3
To Next Page
Loading...
