Technical Specifications
Recommended amplifier power: Up to 250W
Power rating to DIN IEC 268: 135W RMS
550W peak
Maximum sensitivity (2.83V @ 1m): 95dB
Nominal impedance: 8 ohm
Frequency response (-6dB): To 54kHz, usable output (-18dB) to
100kHz
DRIVE UNIT:
Driver type: 25mm diameter 25 micron titanium
dome, 24 Karat vapour deposited gold
finish, with neodymium
magnet system
CROSSOVER:
Crossover type: 3
rd
order compensated high pass
Crossover frequency: 14, 16 or 18kHz adjustable
Level adjustment: 89dB, 90.5dB, 92dB, 93.5dB, 95dB
Due to our policy of continuous improvement, all specifications are subject to change
without notice.
3rd harmonic
2nd harmonic
5k
10k
20k
50k
Fre q ue nc y (Hz)
100
To Next Page
Loading...
