To Next PageTo Next Page
Need help?Do you have a question about the Tao Motor TBR7 and is the answer not in the manual?
General recommendations for safe riding, covering hazards and precautions.
Emphasizes the importance of helmets and other protective gear for rider safety.
Focuses on learning to ride and being aware of off-road terrain challenges.
Advises riding within personal abilities and avoiding alcohol or drugs.
Highlights the importance of maintenance and risks associated with modifications.
Details on essential protective gear, including helmet types and eye protection.
Importance of rider training and practicing skills in a safe environment.
Explains the importance of understanding vehicle labels and key warning indicators.
Provides key technical data like dimensions, weight, displacement, and power output.
Details on oil volume, fuse rating, battery type, and ignition system.
Identifies key controls on the handlebar, such as levers, switches, and mirrors.
Identifies major components like the frame, wheels, and gear shifter.
Identifies exterior parts including the exhaust, seat, and brake levers.
Explains the functions of the speedometer, indicators, and odometer.
Details the OFF, ON, and LOCK positions and their respective functions.
Covers fuel capacity, reserve, and the operation of the fuel valve positions.
Step-by-step instructions for starting the engine in cold and warm conditions.
Explains the functions of the main switch and the starter button.
Details the operation of headlight, horn, and turn signal switches.
Describes the 5-speed transmission's shift pattern and how to operate it.
Provides a procedure for checking the engine oil level correctly.
Details the steps for draining old oil and refilling with new engine oil.
Explains how to inspect, gap, and install the spark plug.
Details the procedure for cleaning and replacing the air filter element.
Covers inspecting the throttle cable and adjusting its free play.
Provides steps for adjusting the carburetor idle screw to set the desired RPM.
Details the procedure for adjusting the free play of the clutch lever.
Covers checking the brake fluid level and basic system maintenance.
Explains how to inspect and adjust the rear brake pedal free play.
Details inspection procedures for the side stand and sprockets.
Describes how to inspect the drive chain for slack and proper condition.
Provides instructions for adjusting the drive chain slack.
Details the proper methods for lubricating and cleaning the drive chain.
Steps for safely removing and installing the motorcycle battery.
Covers procedures for charging the battery and replacing a blown fuse.
Recommends a method for washing the motorcycle using a garden hose and mild detergent.
Presents a table outlining maintenance tasks based on mileage and time intervals.
Details specific checks and lubrication tasks for various motorcycle components.
Covers checks for chassis, shock absorbers, steering system, and engine mounts.
Details lubrication and checks for moving parts, cables, and controls.
Provides a diagram showing the electrical system components and their connections.
Outlines owner's obligations and details of the emission control system warranty coverage.
Specifies warranty terms, duration, and the parts covered under the warranty.
Explains how to obtain warranty service and provides contact information.
Details warranty exclusions, limitations, and lists covered systems/parts.
General recommendations for safe riding, covering hazards and precautions.
Emphasizes the importance of helmets and other protective gear for rider safety.
Focuses on learning to ride and being aware of off-road terrain challenges.
Advises riding within personal abilities and avoiding alcohol or drugs.
Highlights the importance of maintenance and risks associated with modifications.
Details on essential protective gear, including helmet types and eye protection.
Importance of rider training and practicing skills in a safe environment.
Explains the importance of understanding vehicle labels and key warning indicators.
Provides key technical data like dimensions, weight, displacement, and power output.
Details on oil volume, fuse rating, battery type, and ignition system.
Identifies key controls on the handlebar, such as levers, switches, and mirrors.
Identifies major components like the frame, wheels, and gear shifter.
Identifies exterior parts including the exhaust, seat, and brake levers.
Explains the functions of the speedometer, indicators, and odometer.
Details the OFF, ON, and LOCK positions and their respective functions.
Covers fuel capacity, reserve, and the operation of the fuel valve positions.
Step-by-step instructions for starting the engine in cold and warm conditions.
Explains the functions of the main switch and the starter button.
Details the operation of headlight, horn, and turn signal switches.
Describes the 5-speed transmission's shift pattern and how to operate it.
Provides a procedure for checking the engine oil level correctly.
Details the steps for draining old oil and refilling with new engine oil.
Explains how to inspect, gap, and install the spark plug.
Details the procedure for cleaning and replacing the air filter element.
Covers inspecting the throttle cable and adjusting its free play.
Provides steps for adjusting the carburetor idle screw to set the desired RPM.
Details the procedure for adjusting the free play of the clutch lever.
Covers checking the brake fluid level and basic system maintenance.
Explains how to inspect and adjust the rear brake pedal free play.
Details inspection procedures for the side stand and sprockets.
Describes how to inspect the drive chain for slack and proper condition.
Provides instructions for adjusting the drive chain slack.
Details the proper methods for lubricating and cleaning the drive chain.
Steps for safely removing and installing the motorcycle battery.
Covers procedures for charging the battery and replacing a blown fuse.
Recommends a method for washing the motorcycle using a garden hose and mild detergent.
Presents a table outlining maintenance tasks based on mileage and time intervals.
Details specific checks and lubrication tasks for various motorcycle components.
Covers checks for chassis, shock absorbers, steering system, and engine mounts.
Details lubrication and checks for moving parts, cables, and controls.
Provides a diagram showing the electrical system components and their connections.
Outlines owner's obligations and details of the emission control system warranty coverage.
Specifies warranty terms, duration, and the parts covered under the warranty.
Explains how to obtain warranty service and provides contact information.
Details warranty exclusions, limitations, and lists covered systems/parts.
General| Brand | Tao Motor |
|---|---|
| Model | TBR7 |
| Category | Motorcycle |
| Language | English |
