TAO TT-BS017 User Manual

Connect scanner via USB cable for charging. Red LED indicates charging, blue indicates full charge.

Guides on pairing scanner with receiver for operation, starting with single receiver setup.

Step-by-step process to pair one scanner with one receiver for basic functionality.

Connect one scanner to multiple receivers to broadcast scanned data simultaneously.

Pair multiple scanners to one receiver for centralized data collection.

Assign unique numerical IDs to scanners to distinguish them in multi-scanner environments.

Configure the scanner to automatically power off after a set period of inactivity.

Define characters to be added before each scanned barcode data.

Define characters to be added after each scanned barcode data.

Configure the scanner to omit a specified number of initial characters from scanned data.

Configure the scanner to omit a specified number of trailing characters from scanned data.

Instructions on uploading scanned data from the scanner to a computer or software.

Methods to exit inventory or deep sleep modes and return the scanner to standard operation.

Procedures to restore the scanner to its original factory default settings.

Puts the scanner into a low-power state, requiring a long trigger press to wake.

Allows scanning and storing barcodes internally without a live connection to a receiver.

Set specific radio channels for receivers to prevent interference in multi-receiver setups.

Details the 12-month parts and labor warranty coverage and exclusions for the scanner.

Outlines after-sale service policies and conditions based on purchase origin.