TaoTronics SoundLiberty 95

To Next Page

Package Contents

USER GUIDE

QUICK START GUIDE

ｖ TaoTronics True Wireless Stereo Earbuds (TT-BH095)

ｗ!1 x USB-C Charging Cable

ｘ 1 x User Guide

ｙ 1 x Quick Start Guide

Product Diagram

⑥ Charging Slot

⑦ Charging Indicator

⑧ USB-C Charging Port

⑨ Charging Case

⑩ Reset Button

Important Safety Instructions

Please read the instructions thoroughly before using this product and retain it for

future reference.

• Do not wear earbuds with high volume for a long time to avoid damaging

your hearing.

• Set the earbuds to low volume before you put them on, then increase the

volume gradually as per your preference.

• Do not set volume too high to stay aware of your surroundings.

• Please refer to local laws and regulations if you want to answer phone calls via

this device during driving.

• For your safety, avoid distraction from music or phone calls when you are

driving or doing other activities with potential dangers.

Hearing Safety

Warning: Please set the volume to proper level to avoid hearing

damages.

• Do not expose this product to high temperatures.

• Do not immerse the earbuds into water or expose them to humidity for a

long time.

• Do not clean the product with detergent containing alcohol, ammonia,

benzene or abrasives.

• Avoid dropping.

• Place the earbuds back into the charging case when not in use and keep it

away from children and pets to avoid choking hazard.

• Unauthorized disassembly of any parts of this product is forbidden, which may

cause ﬁre hazard, warranty voidance, and/or property loss.

• Close attention is needed when using near children.

• Keep the charging case away from water, rain or any other liquid.

• Don’t use the product in thunderstorm to avoid malfunction or electric shock.

• Always ask a professional technician or authorized personnel for repair.

Caution

This product contains lithium battery. Never expose it to excessive

heat such as direct sunlight or ﬁre to avoid explosion.

Wear Your Earbuds

Please wear the earbuds as shown below.

Pictures only

for reference.

Using Your Earbuds

Charging

Bluetooth Caution

• When the device is connected wirelessly to another device, place

the two devices close to each other to achieve their normal

functionalities and avoid possible signal interference.

• When using a wireless connection, make sure there are no

obstacles between the two devices. Obstacles including walls and

fences may shorten the effective range.

• The maximum effective Bluetooth range may vary with the

environmental circumstances.

1. Put the earbuds into the charging case as per the L (left) and R (right) marks.

2. Cover the lid and charging will start automatically.

Charging the Earbuds

Charging the Charging Case

Note:

• Please fully charge the earbuds when using them for the ﬁrst time.

• When battery is low, a “Battery low” voice prompt will be heard

(if you are wearing the earbuds). Please charge in time or the

earbuds will turn off automatically around 10 minutes later.

• Charge the earbuds at least once every 3 months when not using

for a long time.

1. Connect the charging port with any USB charging adapter or active

computer USB port.

2. The charging indicator will stay solid white, and turn off once fully charged.

Power On

Uncover the lid and they will power on automatically.

Note:

• Unplug the charging cable (timely) when fully charged.

• You can use one earbud or both earbuds as per your preference. Please refer to

the corresponding pairing instructions.

• Before pairing, please turn off other Bluetooth devices and place the device to

be connected close to the earbuds.

• When the earbuds are disconnected from your device for more than 10 minutes,

they will turn off automatically.

Pairing

Power Off

Put the earbuds into the charging case and close the lid, they will turn

off automatically.

1. Uncover the lid to turn on the earbuds, they will connect with each other

automatically. The LED indicator on the charging case will ﬂash blue and white

alternately indicating the earbuds are in pairing mode now.

2. Turn on the Bluetooth function on your device and search for nearby devices.

Find “TAOTRONICS SoundLiberty 95 L” in the searching results, tap on the

name to connect.

3. Once connected, the LED indicator on the charging case will ﬂash blue slowly.

Couple Earbuds Mode

Note

• The earbuds can remember the devices paired previously, and

will attempt to pair with the last connected device for the ﬁrst 20

seconds. If re-pairing failed in 20 seconds, the earbuds will enter

pairing mode.

• It is not recommended to wear the two earbuds on different people. If

necessary, please keep the two earbuds close to each other in couple

earbuds mode.

Model: TT-BH095

TaoTronics SoundLiberty 95

True Wireless Stereo Earbuds

User Guide

L R

① Microphone

② Multifunction Touch Control

③ Charging Contacts

④ Microphone

⑤ LED Indicator

Bottom

Need help?

Do you have a question about the TaoTronics SoundLiberty 95 and is the answer not in the manual?

Summary

Important Safety Instructions

Hearing Safety

Guidelines for safe listening volume and environmental awareness.

Caution

Safety precautions for temperature, water, cleaning, dropping, children, and unauthorized disassembly.

Wear Your Earbuds

Bluetooth Caution

Advice on maintaining Bluetooth connection range and avoiding signal interference.

Using Your Earbuds

Charging the Earbuds

Instructions for placing earbuds in the charging case to initiate charging.

Charging the Charging Case

Steps to connect the charging case to a power source for charging.

Pairing

Couple Earbuds Mode

Steps to connect both earbuds to a device simultaneously.

Single Earbud Mode

Use Primary (Left) Earbud Only

Guide for connecting and using only the left earbud.

Use Secondary (Right) Earbud Only

Guide for connecting and using only the right earbud.

Summary

Important Safety Instructions

Hearing Safety

Guidelines for safe listening volume and environmental awareness.

Caution

Safety precautions for temperature, water, cleaning, dropping, children, and unauthorized disassembly.

Wear Your Earbuds

Bluetooth Caution

Advice on maintaining Bluetooth connection range and avoiding signal interference.

Using Your Earbuds

Charging the Earbuds

Instructions for placing earbuds in the charging case to initiate charging.

Charging the Charging Case

Steps to connect the charging case to a power source for charging.

Pairing

Couple Earbuds Mode

Steps to connect both earbuds to a device simultaneously.

Single Earbud Mode

Use Primary (Left) Earbud Only

Guide for connecting and using only the left earbud.

Use Secondary (Right) Earbud Only

Guide for connecting and using only the right earbud.

The TaoTronics SoundLiberty 95 (Model: TT-BH095) are true wireless stereo earbuds designed for a seamless audio experience. This user guide provides comprehensive instructions for their operation, maintenance, and troubleshooting, ensuring users can maximize their enjoyment of the device.

Function Description

The SoundLiberty 95 earbuds are primarily designed for audio playback and hands-free communication. They connect wirelessly to your device via Bluetooth, offering freedom from tangled wires. The earbuds can be used in either "Couple Earbuds Mode" for stereo sound or "Single Earbud Mode" for individual use, catering to different user preferences and scenarios.

In Couple Earbuds Mode, both earbuds work in tandem to deliver a rich, stereo audio experience. This mode is ideal for listening to music, watching videos, or engaging in calls where immersive sound is desired. The earbuds automatically connect to each other upon being taken out of the charging case, simplifying the setup process.

Single Earbud Mode allows users to utilize either the left (primary) or right (secondary) earbud independently. This is particularly useful for situations where one needs to remain aware of their surroundings, or when extending battery life by using one earbud at a time. The primary (left) earbud is designed to connect first, and if only the secondary (right) earbud is desired, specific pairing steps are provided to ensure proper connection.

The earbuds feature multifunction touch controls, enabling users to manage various functions without needing to access their connected device directly. These controls allow for playing and pausing music, skipping tracks (next/previous), answering and hanging up phone calls, and declining incoming calls. Additionally, there's a voice control feature that can be turned on or off, providing auditory feedback for certain operations.

The charging case serves as both a protective storage unit and a portable power bank for the earbuds. It ensures the earbuds are always ready for use by charging them automatically when placed inside. The case itself is rechargeable via a USB-C charging cable, and an LED indicator on the case provides visual feedback on its charging status and the earbuds' pairing mode. A reset button on the charging case allows for manual pairing and clearing of the pairing list, offering flexibility in managing connections.

Usage Features

To begin using the SoundLiberty 95, users must first ensure the earbuds are adequately charged. The earbuds charge automatically when placed in their designated slots within the charging case and the lid is closed. The charging case itself needs to be charged via a USB-C cable connected to a USB charging adapter or an active computer USB port. A solid white indicator on the charging case signifies charging, turning off once fully charged. It's recommended to fully charge the earbuds before first use and to charge them at least once every three months if not in regular use, to maintain battery health.

Powering on the earbuds is as simple as uncovering the lid of the charging case; they will power on automatically. To power them off, users just need to place them back into the charging case and close the lid.

Pairing the earbuds with a Bluetooth-enabled device involves a straightforward process. In Couple Earbuds Mode, after uncovering the lid, the earbuds will automatically connect to each other and enter pairing mode, indicated by alternating blue and white flashes on the charging case's LED. Users then search for "TAOTRONICS SoundLiberty 95 L" on their device's Bluetooth list and tap to connect. Once connected, the LED will flash blue slowly. The earbuds have a memory function, attempting to re-pair with the last connected device for 20 seconds before entering pairing mode if unsuccessful.

For Single Earbud Mode, specific instructions are provided to ensure the correct earbud (left or right) is used as the primary connection. This involves taking out only the desired earbud while keeping the other in the closed charging case. The earbud will then enter pairing mode if it doesn't re-pair with a previously connected device.

Manual pairing is also possible by placing both earbuds back in the uncovered charging case and holding the reset button for 3 seconds to disconnect the current device. This puts the earbuds into pairing mode, allowing connection to a new Bluetooth device. To clear the entire pairing list, the reset button should be held for 8 seconds until the LED indicator flashes blue and white alternately. This is particularly useful for troubleshooting pairing issues or connecting to a completely new set of devices.

The touch controls are intuitive:

Play/Pause: Tap the right earbud twice (Couple Earbuds Mode only).
Next Track: Tap the right earbud three times.
Previous Track: Tap the left earbud three times.
Answer Phone Call: Tap either earbud twice.
Hang Up Phone Call: Tap either earbud twice.
Decline Incoming Call: Tap either earbud three times.
Turn On/Off Voice Control: Tap the left earbud twice (Couple Earbuds Mode) or either earbud twice (Single Earbud Mode) until a beep is heard.

Maintenance Features

Proper maintenance is crucial for the longevity and optimal performance of the SoundLiberty 95 earbuds. The user guide emphasizes several key practices:

Regular Cleaning: Both the earbuds and the charging case should be cleaned regularly using a dry and soft cotton cloth. This helps remove dirt, earwax, and other debris that can accumulate and affect sound quality or charging contacts.
Protection from Damage: Keep the unit away from sharp objects to prevent scratches. Avoid dropping the earbuds or the charging case, as this can cause internal or external damage.
Environmental Care: Do not expose the product to high temperatures, immerse it in water, or expose it to humidity for extended periods. When not in use for a long time, store the unit in a dry and shady place.
Chemical Avoidance: Never clean the product with detergents containing alcohol, ammonia, benzene, abrasives, or other harsh chemicals, as these can damage the materials.
Battery Safety: The product contains a lithium battery, and it's important not to expose it to excessive heat, direct sunlight, or fire to prevent explosion.
Child Safety: Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazards. Close attention is needed when using near children.
Thunderstorm Precaution: Avoid using the product during thunderstorms to prevent malfunction or electric shock.
Professional Repair: In case of malfunction, always seek assistance from a professional technician or authorized personnel for repairs. Unauthorized disassembly is forbidden and can void the warranty.

The guide also includes important safety instructions regarding hearing safety, advising users to avoid wearing earbuds at high volumes for extended periods and to gradually increase volume to a comfortable level. It also cautions against setting the volume too high to maintain awareness of surroundings and to avoid distractions from music or phone calls while driving or engaging in other activities with potential dangers.

By following these guidelines, users can ensure their TaoTronics SoundLiberty 95 earbuds remain in excellent condition and provide a reliable audio experience for an extended period.

TaoTronics SoundLiberty 95 Specifications

General

Bluetooth Version	5.0
Charging Case Battery Life	32 hours
Charging Time	2 hours
Charging Time (Case)	2 hours
Water Resistance	IPX8
Driver Size	13mm
Type	In-ear
Connectivity	Bluetooth
Frequency Response	20Hz-20kHz
Microphone	Yes
Wireless Range	15m
Noise Cancellation	Yes (Active Noise Cancellation)