To Next PageTo Next PageWhat to do if TaoTronics SoundLiberty 53 Headphone failed to charge?
If your TaoTronics Headphone is not charging, make sure to: * Place the earbuds into the charging case properly. * Ensure the charging case is fully charged.
What to do if there is no sound in one of the TaoTronics SoundLiberty 53 Headphone earbuds?
If you experience no sound in one of the TaoTronics Headphone earbuds, place both earbuds back into the charging case and then take them out. They will pair with each other automatically.
Why did my TaoTronics SoundLiberty 53 fail to pair with my device?
If your TaoTronics Headphone fails to pair with your device: * Ensure that the device is turned on and its Bluetooth function is activated before pairing. * Bring the earbuds into pairing mode as instructed in the “Pairing” section.
Why can't I charge my TaoTronics Headphone charging case?
If you can't charge the TaoTronics Headphone charging case, make sure the charging cable is intact and plugged in properly.
What to do if Multifunction Touch control of TaoTronics Headphone is unresponsive?
If the Multifunction Touch control of your TaoTronics Headphone is unresponsive, place the earbuds into the charging case and disconnect the Bluetooth connection. Then, take the earbuds out of the charging case and pair them again.
Why is my TaoTronics SoundLiberty 53 connection unstable?
An unstable connection with your TaoTronics Headphone can occur if the earbuds are too far from your Bluetooth device or if there are obstacles between them. Try keeping the earbuds close to your Bluetooth device and removing any obstacles. Also, turning off other Bluetooth devices can decrease interference.
What to do if TaoTronics SoundLiberty 53 Headphone sound quality is poor?
If you are experiencing poor sound quality with your TaoTronics Headphone, try placing the connected device closer to the earbuds or removing any obstacles between them. Also, ensure that you clear any debris from the earbuds.
Why can’t I hear the other party during a phone call with TaoTronics SoundLiberty 53 Headphone?
If you can’t hear the other party during a phone call using your TaoTronics Headphone, try setting the volume to a higher level.
Why can't the other party hear my voice during a phone call with TaoTronics Headphone?
If the other party can’t hear your voice during a phone call while using your TaoTronics Headphone, ensure that the built-in microphone is free of any covers.
Guidance on safe listening volumes and awareness to prevent hearing damage.
Warnings regarding high temperatures, water immersion, cleaning agents, dropping, and unauthorized disassembly.
Instructions for selecting and fitting ear tips for optimal comfort and seal.
Visual guide on how to correctly insert and wear the earbuds for proper fit and function.
Advice on maintaining stable Bluetooth connection, including range and interference considerations.
Steps for placing earbuds into the charging case and understanding the charging indicators.
Instructions on how to charge the charging case using a USB-C cable and power source.
Automatic power-on when opening the case and power-off when earbuds are returned.
Instructions for pairing in both couple (stereo) and single earbud modes.
Steps to reset the earbuds' Bluetooth pairing list to resolve connection issues.
Guidance on safe listening volumes and awareness to prevent hearing damage.
Warnings regarding high temperatures, water immersion, cleaning agents, dropping, and unauthorized disassembly.
Instructions for selecting and fitting ear tips for optimal comfort and seal.
Visual guide on how to correctly insert and wear the earbuds for proper fit and function.
Advice on maintaining stable Bluetooth connection, including range and interference considerations.
Steps for placing earbuds into the charging case and understanding the charging indicators.
Instructions on how to charge the charging case using a USB-C cable and power source.
Automatic power-on when opening the case and power-off when earbuds are returned.
Instructions for pairing in both couple (stereo) and single earbud modes.
Steps to reset the earbuds' Bluetooth pairing list to resolve connection issues.
General| Bluetooth Version | 5.0 |
|---|---|
| Playtime | 5 hours |
| Water Resistance | IPX7 |
| Driver | 6 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 16 ohms |
| Charging Time | 2 hours (charging case) |
| Wireless Range | 15 meters |
| Bluetooth Range | 15 meters |
| Battery Life | 40 hours with case |
| Sensitivity | 95dB ± 3dB |
