Why is the TaoTronics TT-DL095 touch control panel not responsive?
The touch control panel might not be responsive due to wet hands. Ensure your hands are dry before tapping the panel. Alternatively, voltage fluctuation could be the cause. Try disconnecting and reconnecting the power adapter to restart the TaoTronics Work Light.
What to do if the TaoTronics Work Light does not light up?
If the TaoTronics Work Light does not light up, first, ensure the power adapter is correctly plugged in. If it's still not working, make sure that the lamp is turned on.
Instructions for connecting the power adapter and plugging into an electrical outlet.
Details on operating the lamp using the physical controller for brightness and color adjustments.
Guide to using the remote control for ON/OFF, brightness, and color temperature adjustments.
Information on battery status indicators (low, charging, fully charged) for the remote control.
Guidance on how to adjust the lamp head's angle for optimal lighting.
General| Brand | TaoTronics |
|---|---|
| Model | TT-DL095 |
| Category | Work Light |
| Light Source | LED |
| Brightness | 1000 lumens |
| Color Temperature | 6000K |
| Battery Type | Lithium-ion |
| Charging Time | 4-5 hours |
| Brightness Levels | 3 |
| Luminous Flux | 1000 lumens |
| Beam Angle | 120 degrees |
| Waterproof Rating | IPX4 |
| Warranty | 12 months |
| LED Lifespan | 50000 hours |
| CRI | ≥80 |
| Wattage | 10W |
| Material | Plastic |
To Next Page
