02/03
Button Control
LED Indication
Operation
Press and hold the Power Button until a beep
is heard.
Press the Volume + button
Press and hold the Volume + button under the
Bluetooth mode
Press the Volume - button
Press and hold the Volume - button under the
Bluetooth mode
Press the Mode Button to switch between the
Bluetooth and AUX mode.
Press the Play / Pause button
Press the Play / Pause button to mute /
unmute
Function
Power On / Off
Volume +
Next Track
Volume -
Previous Track
Switch to Bluetooth
/ AUX Mode
Play / Pause
Mute
(only under AUX mode)
LED Status
Light up blue / green.
Flashes blue fast
Stays solid blue during playing;
Blinks blue slowly when no audio input
Stays solid green during playing;
Blinks green slowly when no audio input
Operations
Power on
Pairing
Connected
AUX Connection
Bluetooth
Connection
How to Use
Bluetooth Connection
1. Plug the sound bar to power, press and hold the Power Button until a
beep is heard. The device is in the Bluetooth mode initially.
2. When the indicator starts to ash fast, activate the Bluetooth function on
your device and search for devices nearby.
3. Find “TaoTronics TT-SK025” in the search results and tap to connect.
4. A beep will be heard and the indicator will turn solid blue upon a
successful connection.
Notes:
1) When it’s power on, the sound bar will automatically connect to
the device last paired if any. Otherwise, it’ll enter the pairing mode
with the LED indicator blinking fast.
2) To change the connection, press and hold the Play / Pause
button to enter the pairing mode and connect another device.
AUX Cable Connection
1. Press the Mode Button to switch to AUX mode.
2. Plug in the AUX cable into the AUX Input port at the back.
3. Connect to an AUX device via the cable.
Note: Buttons on the sound bar do not work under the AUX mode,
except that pressing the Play / Pause button can mute / unmute.
AUX Input
AUX Output
To Next Page
Loading...
Need help?
General
