07/08
How To Use
Charging
1. Connect the charging port with any USB charging
adapter or active computer USB port.
2. Charging will start automatically with the charging
indicator turning red.
3. The speaker is fully charged when the charging indicator
turns green.
Pairing
1. Turn on the speaker by pressing and holding the Power
Button.
2. Once the speaker is on,it will go into pairing mode
automatically and the Bluetooth indicator will start
ashing.
3. Activate the Bluetooth function on your device and
search for nearby Bluetooth connections.
For iOS: Settings > General > Bluetooth > On
For Android: Settings > Bluetooth > On > Scan for devices
4. Select “TaoTronics TT-SK11” from the search results and tap
to connect.
5. The Bluetooth indicator will turn solid and there will be a
tone to indicate a successful connection.
Note:
• Please make sure there are no other open Bluetooth
devices within range, and that the speaker is within 3 feet
of your device.
• The speaker will attempt to pair with the last paired device
when powered on. If you have previously paired the
speaker with a device, simply turn on your device and the
speaker. They will pair automatically without going into
pairing mode.
AUX Mode
Connect any device to the TaoTronics TT-SK11 using a 3.5mm
AUX cable. Turn on the speaker and play music through AUX
mode.
Note:
• When connected in AUX mode, the Bluetooth connection
is temporarily disabled.
To Next Page
Loading...
Need help?
General
