TAPCO TOOLS MAX-I-MUM XL User Manual

MAX-I-MUM XL
Commercial Bender System
The MAXIMUM XL COMMERCIAL
BENDER SYSTEM includes:
MAX-I-MUM II
™
Port-O-Bender
®
MAX Snap Stand
®
and Wheel Kit
Adjustable MAX Cut-O
™
Table of Contents
MAX-I-Mum II
Setup .......................................................................... 1
Adjustment .............................................................. 2
Parts List .................................................................... 3
Care & Maintenance ............................................. 4
Specifications .......................................................... 4
Examples of Basic Shapes ................................... 5
Adjustable MAX Cut-Off
Setup .......................................................................... 6
Parts List .................................................................... 6
MAX Snap Stand
Setup .......................................................................... 7
Wheel Kit ................................................................... 7
Installing MAX Brake............................................. 8
Counter Balance Assembly ................................ 9
Removing MAX Brake.........................................10
Parts List ..................................................................10
TapcoTools.com | (800) 521-8486
Operations Manual

TAPCO TOOLS MAX-I-MUM XL Specifications

General

Brand	TAPCO TOOLS
Model	MAX-I-MUM XL
Category	Construction Equipment
Language	English

Summary

Setting Up Your MAX-I-MUM II

Hemming Handle Installation

Instructions for attaching the hemming handle assembly to the bender.

Lifting and Bending Handle Setup

Guide to installing the lifting and bending handle assembly.

Hinge Clip Installation

How to install the Hinge Clip for alignment and material control.

Adjusting Your MAX-I-MUM II

Power Link Adjustment Instructions

Steps to adjust power links for proper gripping tension and performance.

MAX-I-Mum II Care and Maintenance

Routine Maintenance Procedures

Basic maintenance steps to keep the Port-O-Bender in good condition.

Technical Specifications

Technical specifications including length, weight, and capacities.

Examples of Basic Shapes

Setup for Adjustable MAX Cut-Off

Safety Information for Cut-Off

Crucial safety warnings to follow before operating the tool.

MAX Cut-Off Installation Procedure

Step-by-step instructions for setting up the MAX Cut-Off.

MAX Snap Stand and Wheel Kit Setup

Snap Stand Assembly and Locking

Instructions for assembling the MAX Snap Stand and locking its legs.

Attaching the Wheel Kit

Guide for attaching the optional wheel kit to the Snap Stand.

Installing MAX Brake on MAX Snap Stand

Attaching Counter Balance Assembly

Removing Brake from MAX Snap Stand