Need help?Do you have a question about the Tapco S-8 and is the answer not in the manual?
Follow instructions, avoid hazards like water, heat, and ensure proper ventilation.
Qualified service, polarized plug safety, grounding, storm precautions, and noise limits.
Warning about hearing loss from high noise levels and OSHA guidelines.
Steps for initial settings, connecting cables, and powering on.
Factors affecting bass response, room acoustics, and speaker positioning.
Using LOW FREQ switch to adjust bass based on room placement.
Using HIGH FREQ switch to adjust high-frequency output for mixing.
Monitor shutdown, saving packaging, and keeping receipts.
Overview of the main features and benefits of the S.8 monitors.
Diagram for connecting two monitors in stereo.
Diagram for connecting multiple monitors in series.
Explanation of input jacks and the input level adjustment control.
Details on the HIGH FREQ equalization switch.
Using LOW FREQ switch and selecting AC voltage.
Function of power, fuse, port, and heatsink.
Description of Power LED and Clip LED indicators.
Safeguards against overexcursion, overheating, and magnetic interference.
Recommendations for using shielded cables and preventing noise.
How to obtain warranty service and required documentation.
Steps to diagnose and resolve common operational issues.
Detailed procedure for sending the monitor for repair, including RA number.
Wiring details for balanced audio connections using XLR and TRS plugs.
Wiring details for unbalanced audio connections using TS and RCA plugs.
Technical data on acoustic performance, amplifiers, crossover, and EQ.
Power requirements, physical dimensions, weight, and internal circuit diagram.
Details on product warranty period, coverage, and claim procedures.
To Next Page
General