Need help?Do you have a question about the Tapco S5 and is the answer not in the manual?
Key operating instructions and warnings to be read before using the product.
Step-by-step guide for quickly setting up and connecting the studio monitors.
Diagram for connecting two S.5 monitors in stereo to a mixer or preamplifier.
Details on input connectors (XLR, TRS, RCA) and the INPUT LEVEL adjustment.
Troubleshooting steps for no power, no sound, bad sound, and noise/hum.
Details of the one-year limited warranty, including coverage, service, and limitations.
Key operating instructions and warnings to be read before using the product.
Step-by-step guide for quickly setting up and connecting the studio monitors.
Diagram for connecting two S.5 monitors in stereo to a mixer or preamplifier.
Details on input connectors (XLR, TRS, RCA) and the INPUT LEVEL adjustment.
Troubleshooting steps for no power, no sound, bad sound, and noise/hum.
Details of the one-year limited warranty, including coverage, service, and limitations.
General| Input Types | XLR, 1/4" TRS |
|---|---|
| Weight | 10.5 lbs (4.8 kg) |
| HF Driver Power Amp | 20W |
| Crossover Frequency | 3 kHz |
| Type | Studio Monitor |
| Woofer Size | 5 inches |
| Tweeter Size | 1 inch |
| Frequency Response | 65 Hz - 22 kHz |
| LF Driver Size | 5 inches |
| Inputs | XLR |
To Next Page
