Tar River Econo-Wrap EW-450A

Need help?

Do you have a question about the Tar River Econo-Wrap EW-450A and is the answer not in the manual?

Summary

Introduction and General Information

Principles of Safe Operation

Safety Signs and Explanations

Functioning and Operational Use

Transport and Loading Procedures

Principles for transporting the bale wrapper on a tractor's three-point hitch and on public roads.

Assembly with Tractor

Steps for correctly assembling the bale wrapper with the tractor using pins and hydraulic connections.

Operation Testing and Film Installation

Pre-Operation Checks and Testing

Checking machine operation, hydraulic system, and frame locking before starting wrapping.

Film Roll Installation

Procedure for installing the film roll and adjusting rubber rollers for proper film tension.

Loading, Wrapping, and Unloading Bales

Recommendations and Adjustments

Overload Valve Adjustment

Procedure for adjusting the overload valve to ensure smooth machine operation and prevent jerking.

Film Width Adjustment

Adapting the machine for different film widths by adjusting rollers and chain positions.

Parts Breakdown

EW-450 A Rotating Frame Parts

Diagram and parts list for the rotating frame assembly of the EW-450A bale wrapper.

EW-450 A Lower Frame Parts

Diagram and parts list for the lower frame assembly of the EW-450A bale wrapper.

EW-450 A Main Frame Parts

Diagram and parts list for the main frame assembly of the EW-450A bale wrapper.

EW-450 A Film Feeder Parts

Diagram and parts list for the film feeder assembly of the EW-450A bale wrapper.