How to fix non uniform spread pattern on Tar River RONDINI SQFT Spreader?
If you notice a non-uniform spread pattern with your Tar River Spreader, it might be due to a wrong gate opening. In this case, you should adjust the gate opening. Another potential cause is that the spreader or pendular arm isn't positioned correctly. Ensure the spreader is parallel to the ground and the spout is 28-32 inches above ground level.
Why is the spread width narrow on my Tar River RONDINI SQFT Spreader?
A narrow spread width on your Tar River Spreader could be due to an incorrect PTO speed. Try increasing the PTO speed to 540 rpm. Another reason could be that the pendular spout is at the wrong angle or height. Make sure to adjust the spreader so it's parallel to the ground, with the spout 28-32 inches above ground level.
What to do if product not flowing to pendular arm in Tar River RONDINI SQFT?
If the product isn't flowing to the pendular arm in your Tar River Spreader, it might be because the product is wet. Use only dry product or consider using an optional rubber insert. Alternatively, if you're using a powdered product, you might need an optional agitator.
Why is PTO shaft turning but not the pendular arm on Tar River RONDINI SQFT Spreader?
If the PTO shaft is turning but the pendular arm isn't moving on your Tar River Spreader, the roll pin might be missing or sheared. You should replace the roll pin. Also, the cam could be broken or worn, requiring replacement.
Explains the meaning and importance of the safety alert symbol used throughout the manual.
Defines DANGER, WARNING, and CAUTION signals for hazard communication.
Pre-work checks and preparations before assembling the spreader.
Step-by-step guide for connecting the spreader to the tractor hitch.
Instructions on how to shorten the PTO driveline if necessary for proper fit.
Outlines the operator's duties for safe and correct use of the spreader.
Essential checks to perform before starting operation of the spreader.
Methods and considerations for effective and safe spreader operation.
To Next Page
General
