Tar River SRB-870 - User Manual

Other manuals for Tar River SRB-870

Instruction Manual44 pages

Questions and Answers

M
Mark LucasAug 18, 2025
Why is my Tar River SRB-870 making abnormal noise?
- T
  Timothy WhiteAug 19, 2025
  Abnormal noise from your Tar River Lawn and Garden Equipment may be due to several reasons: a broken tine (requires tine replacement), a broken rotor flush (requires rotor flush replacement), winding of hay or twine (remove the winding material), a broken cam roller bearing (requires replacement), or insufficient V-belt tension (adjust according to section “5-2-2 adjustment of pick-up V belt tension”).
I
icooperAug 21, 2025
What to do if baling material is clogged between pick-up and chamber in Tar River SRB-870 Lawn and Garden Equipment?
- E
  ecobbAug 21, 2025
  If baling material is clogged between the pick-up and chamber of your Tar River Lawn and Garden Equipment, it could be due to several factors. The PTO rotation might be too fast (adjust PTO rotation according to “3-3-2 Field operation”), there might be obstruction by the side cover and cover shield (take outside cover and cover shield), the traveling speed might be too fast (reduce traveling speed), the window might be too wide and too high (make window in accordance with “3-3-2 Method of window making”), or the pick-up might be too declined (shorten top link for obtaining forward declined machine position).
D
Deborah PetersonAug 23, 2025
Why is material winding on the roller of my Tar River SRB-870?
- K
  Kent KlineAug 23, 2025
  Material winding on the roller of your Tar River Lawn and Garden Equipment can occur due to several reasons: the PTO rotation is too fast (adjust PTO rotation according to “3-3-2 Adjustment for operation”), material is clogging in the pick-up (remedy according to “pick-up” trouble shooting), or there is a dent in the roller (replace the dented roller).
H
Heidi AllenAug 25, 2025
What to do if the roller chain on my Tar River Lawn and Garden Equipment generates heat?
- M
  Mary LarsonAug 26, 2025
  If the roller chain on your Tar River Lawn and Garden Equipment is generating heat, it could be due to too high bale density (adjust in accordance with “3-2-4 Adjustment of bale density” and “5-2-6 Adjustment of bale density detection link”), or insufficient lubrication to the roller chain (apply grease to roller chain per “5-2-1 Roller chain tension adjustment”).
M
Mark BarnesAug 28, 2025
Why is material not picked up cleanly by my Tar River SRB-870?
- T
  Tonya WestAug 28, 2025
  If your Tar River Lawn and Garden Equipment isn't picking up material cleanly, it might be due to a wrong pick-up setting (adjust according to “3-2-1 adjustment pick-up height from ground”), traveling speed being too fast (reduce traveling speed), or a broken tine (replace the tine).
M
Mr. Jason Miller DDSAug 30, 2025
Why does the roller on my Tar River Lawn and Garden Equipment make abnormal noise?
- A
  alyssacarterAug 30, 2025
  Abnormal noise from the roller on your Tar River Lawn and Garden Equipment can be caused by wrapping material or mud on the material (remove the wrapping material, mud, or clogged material), insufficient lubrication (apply oil to the roller chain), insufficient roller chain tension (adjust according to “5-2-1 Roller chain tension adjustment”), or a dent in the roller (replace the dented roller).
H
Heather Hancock MDSep 1, 2025
Why doesn't the pick-up rotate on my Tar River SRB-870 Lawn and Garden Equipment?
- E
  Edward GoodmanSep 1, 2025
  The pick-up on your Tar River Lawn and Garden Equipment may not rotate due to several reasons: wrong V-belt tension adjustment (adjust in accordance with “5-2-2 adjustment of tension for pick-up”), breakage of the V-belt (replace the broken V-belt). For issues related to too much clearance between pick-up tines and the ground or a window that's too wide and high, consult the relevant sections.
C
christinalaneSep 3, 2025
Why does the gate on my Tar River SRB-870 Lawn and Garden Equipment open because the stopper comes off?
- C
  candice52Sep 4, 2025
  If the gate on your Tar River Lawn and Garden Equipment opens because the stopper comes off, it's likely due to the stretching of the power package operation rope (adjust in accordance with “1-4-3 Attachment of power package operation rope”).
C
Colleen MillerSep 6, 2025
Why is the bale density loose in my Tar River SRB-870?
- E
  Eric BarronSep 6, 2025
  Loose bale density in your Tar River Lawn and Garden Equipment can occur due to exceeding bale density operation because of not adjustment of bale density detection link (remedy in accordance with “Buzzer” in trouble shooting). For further adjustment, refer to “5-2-6 Adjustment of bale density detection link”.
S
Stephanie MoralesSep 8, 2025
Why does the binding device work before reaching the setting density on my Tar River SRB-870?
- M
  madisonnicholsonSep 8, 2025
  If the binding device on your Tar River Lawn and Garden Equipment activates before reaching the set density, it could be because the binding is not set in the correct initial position (adjust in accordance with “1-2-4 Method of twine threading”) or due to a longer leading twine length because of a dull blade (replace the blade and adjust the leading twine length in accordance with “1-4-4 Method of twine threading”).