This document provides assembly instructions and care guidelines for the MYKONOS COFFEE TABLE, a piece of ready-to-assemble (RTA) furniture designed for domestic use. It is explicitly stated that this furniture is NOT SUITABLE FOR COMMERCIAL USE.
Function Description:
The Mykonos Coffee Table is a flat-pack furniture item that requires self-assembly. Its primary function is to serve as a coffee table, providing a surface for placing items in a living space. The assembly process involves attaching two side frames (Part B) to the main table top (Part A), and then securing a crossbar (Part C) between the two side frames. Once assembled, the table is ready for use.
Important Technical Specifications:
While specific dimensions and materials are not detailed in the provided pages, the components list gives an indication of the hardware required for assembly:
- Part A: Table Top (1 piece) - This is the main surface of the coffee table.
- Part B: Side Frames (2 pieces) - These form the legs and support structure on either end of the table.
- Part C: Crossbar (1 piece) - This connects the two side frames, providing structural integrity.
- Part D: Washers (8 pieces) - Used with bolts to distribute pressure and protect surfaces.
- Part E: M6X35 Bolts (12 pieces) - The primary fasteners for connecting the components.
- Part F: Washers (8 pieces) - Likely larger or different type of washer than Part D, also for pressure distribution.
- Part G: Hex Key (1 piece) - The tool required for tightening the M6X35 bolts.
- Part H: Caps (4 pieces) - Likely decorative caps to cover bolt heads or leg ends.
The assembly process is estimated to take 20 minutes and requires 2 people for efficient and safe completion.
Usage Features:
The Mykonos Coffee Table is designed for ease of assembly and domestic use.
- Assembly: The instructions emphasize a straightforward, three-step process:
- Step 1: Place the table top (A) upside down on a soft surface. Align holes in the side frames (B) over threads in the table top (A) and attach using bolts (E), washers (D, F), and the hex key (G).
- Step 2: Align holes in the crossbar (C) over threads in the side frames (B) and attach using bolts (E), washers (D, F), and the hex key (G). All bolts should be completely tightened at this stage.
- Step 3: Flip the table over, and it is ready for use.
- Safety Precautions during Assembly:
- Choose a clean, level, spacious assembly area, avoiding hard surfaces that could damage the product.
- Take care when lifting components.
- Assemble the product as near as possible to its intended point of use.
- Ensure all required contents are present before starting.
- Read all instructions carefully.
- Keep packaging and contents out of reach of small children due to choking hazards.
- Do not overtighten screws and bolts to prevent thread damage.
- Failure to follow instructions may result in damage or incorrect assembly.
- General Usage Warnings (for Glass & GRC Table Tops, which may apply to this table if made of similar materials):
- Do not use if chipped or broken; contact the place of purchase.
- Avoid dropping, dragging, or striking the surface.
- Do not sit or stand on the surface.
- Do not place very hot or cold items directly on the surface; placemats/coasters are recommended.
- Do not place heavy items on the table.
- Do not strike the surface with hard or pointed items.
- Do not allow hot embers or direct flames near or in direct contact with the surface.
Maintenance Features:
The manual provides general care and maintenance advice applicable to various furniture types, including "Wicker, Textiles, Rope" and "RTA (Ready To Assemble) Furniture," suggesting that the Mykonos Coffee Table might be made of materials requiring similar care or that these are general guidelines for Target's furniture range.
- General Cleaning (Wicker, Textiles, Rope guidelines, potentially applicable):
- For daily care and spills, simply wipe clean using a soft, dry cloth.
- To remove dirt and grime, rinse with fresh water or periodically clean using a sponge and mild detergent solution.
- Avoid abrasive chemicals, harsh cleaners, rough cleaning pads, and polishes to protect the finish.
- Do not allow hot embers or direct flames near or in direct contact with the surface.
- Protection from Direct Sunlight:
- To guard against fading, especially for outdoor furniture exposed to direct sunlight, it is recommended to:
- Store cushions when not in use (if applicable).
- Use a furniture cover.
- Failure to observe these recommendations may result in premature UV damage and/or fading.
- RTA Furniture Specific Maintenance:
- Regular checking and tightening of all bolts is recommended for optimum performance and durability.
- If bolts are not regularly checked and tightened, the furniture could become unstable.
The document emphasizes that failure to follow care and maintenance recommendations can lead to damage, premature UV damage, fading, or instability of the furniture.
Need help?
General
To Next Page