step 02:
8
A2
A2
A1
A1
B1
B1
B1
N
N
N
N
(Part N)×8
M6*15mm screw
(Part R)×1
allen wrench
Do not completely tighten screws until all screws are in place.
1. Place the post leg1 & 2 (A1 & A2) on the soft surface.
2. Attach the connector bar1 (B1) to the post leg1 & 2 (A1 & A2),
secure
with M6*15 mm screws (N) using the allen wrench (R).
3. Repeat above steps for the another set of post leg1 & 2 (A1 & A2)
and connector bar1 (B1).
2.
1.
B1
A2
A1
B1
NOTE:
Ensure the holes on the post leg1 & 2 (A1 & A2) face to center of the pergola.
To Next Page
Loading...
