Target Threshold 009050409 - Page 9

9
step 03:
(Part N)×8
M6*15mm screw
(Part R)×1
allen wrench
A1
A1
A2
A2
B2
B1
B1
B2
B2
B2
B1B1
A1
A2
N
N
N
N
Do not completely tighten screws until all screws are in place.
1. When the post leg1 & 2 (A1&A2) connections are made, set the
post leg1 & 2 (A1 & A2) up right.
2. Attach the connector bar2 (B2) to the post leg1 & 2 (A1 & A2), secure with
M6*15 mm screws (N) using the allen wrench (R).
Ensure the holes on the connector bar1 & 2 (B1 & B2) face to center of the pergola.
3. Repeat above steps for another set of post leg1 & 2 (A1 & A2) and connector bar2 (B2).