24
1. Clean as necessary.
2. Check knives for wear and replace if necessary.
3. Inspect mower for loose, damaged or worn parts and adjust or replace as needed.
4. Store unit inside if possible for longer life.
5. Repaint parts where paint is worn or scratched to prevent rust.
6. Replace all damaged or missing decals.
Bolt torque
The table below gives correct torque values for various bolts and cap screws. Do not grease
or oil bolts or cap screws unless otherwise specified in this manual. Tighten all bolts to the
torques specified unless otherwise noted. Check tightness of bolts periodically using bolt
torque chart as a guide. Replace bolts with the same strength bolt.
Size
8,8 Nm 10,9 Nm
M3 0,5 1,8
M4 3 4,5
M5 6 9
M6 10 15
M8 25 35
M10 50 70
M12 90 125
M14 140 200
M16 225 310
M20 435 610
M24 750 1050
M30 1495 2100
M36 2600 3675
To Next Page
Loading...