- All users shall be trained in use of the machine. the owner is responsible for training
users.
- Engage an authorized workshop for all service and repair not described in this manual.
- Learn how to use the machine and its controls safely and learn to recognize the safely
decals.
- Only use the machine for removing tree stumps it is not intended for any other use.
- Check that the machine is in serviceable condition prior to use;
- Only use the machine in daylight or in other well-lit conditions. Keep the machine a safe
distance from holes or other irregularities in the ground. Pay attention to other possible
risks.
- Only allow the machine to be used by adults who by adults who are familiar with its use.
- Never allow children or persons no trained in the use of the machine to use or service it
Local laws may regulate the age of the user.
- People and animals can distract you causing you to lose control of the machine. For this
reason, you should always concentrate and focus on the task at hand.Never leave the
machine unsupervised with the engine running.
- Make sure that other people are nearby when you are using the machine so that you can
call for help should an emergency arise.
- The machine is tested and approved only with the equipment originally provided or
recommended by the manufacturer.
The engine can become very hot. To avoid being burned, you must turn off the
engine and wait until all parts have cooled before touching the engine.
Overexposure to vibration may lead to circulatory or nerve damage, particularly
in people who have impaired circulation. Contact your doctor if you experience
symptoms that could have been caused by overexposure to vibration.
Examples of common symptoms include numbness, pain, muscle weakness,
change of skin color or an uncomfortable feeling of tingling. These symptoms
appear most frequently in the fingers, hands or wrists.
IMPORTANT INFORMATION
NEVER USE A STUMP GRINDER THAT IS DAMAGED OR
INCORRECTLY ADJUSTED. NEVER USE THE STUMP GRINDER IF
ANY COMPONENT IS MISSING OR IF IT IS NOT PROPERLY
ASSEMBLED. CHECK THAT THE CUTTING TOOLS STOP ROTATING
WHEN YOU REDUCE THE THROTTLE. IF YOU FIND YOURSELF IN A
SITUATION WHERE YOU ARE NOT SURE WHAT TO DO, ALWAYS
SEEK EXPERT ASSISTANCE. DO NOT TRY TO ATTACK ANY
PROBLEM YOU ARE NOT QUALIFIED TO RESOLVE.
To Next Page
Loading...