TAROT ZYX-S2 Three-axis Gyro User Manual
TAROT ZYX-S2 is the newly developed precision three-axis gyro, using new MEMS angular rate
sensor and 32-bit microprocessor, new control algorithms and computer setup software, greatly
enhance the spin stability , vibration resistance and flight performance. Suitable for all 200-800 size
fuel or electric helicopters. Built-in supply voltage detection function, to ensure flight safety. Providing
free firmware upgrade. Setup process is very easy, the whole process only takes 3 minutes.
1. Specification
Dimensions: 37.2mm*25.2mm*13mm
Weight: 9.8g
Operating voltage: DC 3.5V-9V
Operating current drain: 40mA
Operating temperature:-15℃~65℃
Maximal angular rate: 2000 degrees/sec
Tail servo compatibility: 1.52ms analog servo, 1.52ms digital servo, 760us digital servo, 960us digital
servo
Swash plate servo compatibility: 1.52ms analog servo, 1.52ms digital servo
Receiver compatibility: Conventional receiver, S-BUS, DSMJ, DSM2, DSMX（will support more by
firmware upgrade）
Supporting firmware upgrade
Supporting Multi-Blade Rotor Head
2. Connections
Conventional receiver:
S-BUS receiver(Using standard receiver cable)：
To Next Page
Need help?
General