10
Fixing tools
Check:
• that the brushes are not below the red marking and that the bristle length is not
less than 1 cm.
• the pad for wear before using.
Attach squeegee
Fill the fresh water tank
t specify driving direction by using the driving direction
lever (Forwards/Backwards).
t Run the machine to the destination and then release the drive pedal.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
Working with worn out, damaged and or wrong tools, could result in possible
damage to floor or their protective layers.
t Turn the left tool counter-clockwise and the right tool
clockwise into the lock.
This locks the tool into place.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Loosen the fixation knobs on the squeegee.
t Assemble the squeegee and tighten the fixation knobs.
The washers must be positioned above the suction nozzle support.
t Attach the suction hose (squeegee) to the connector.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...
Need help?
General